Jump to content
SAU Community

Pits Tomorrow What To Expect....


GODZ1LLA
 Share

Recommended Posts

Right guys and girls going to the pits tomoz with my tommy kaira skyline i bought from over east....

Anyway was wondering what they will be checking i gather brakes lights all electrical items etc

But i am worried about little things like the suspension as its fairly rock hard and virtually no play in it?? plus it has no cats on it and a 3" straight thru exhaust.

Should i be worried about these 2 things?? car is on coilovers i think? and i have measured the car height and at its lowest point its 120mm off the ground i am under the impresion it has to be over 100mm??

Also the rear tyres are about 1 maybe 2mm above the wear indicators they are 265.35.18s and ubber dear for new ones (got some quotes at around $400 a side) :thumbsup:

Anyway is there anything else they may fail it for ie fmic bov etc etc

I aint gonna sleep tonight!!

Edited by FIRE BREATHER
Link to comment
Share on other sites

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

In short terms, your f0cked. Be prepared to replace things to factory or lesser performance ect. No cat's are $10,000 from memory, they might take visa lol.

Edited by monga
Link to comment
Share on other sites

In short terms, your f0cked. Be prepared to replace things to factory or lesser performance ect. No cat's are $10,000 from memory, they might take visa lol.

What he said, but yeh u will defenitly need to get some cats on it b4 u go over, id say he will do u on the rims to, id hope for your sake that you arnt on P's

Link to comment
Share on other sites

Coils - hit and miss

Exhaust = your stuffed...

Tyres depends, camber wear?

I've got a stock 33 GTR exhaust you could potentially borrow...

EDIT: whoops cat :thumbsup:, still on my car, no you cant have it!

Edited by Ten Four
Link to comment
Share on other sites

Dude, dont take it over with no cats. Its a massive fail and they can fine you for it.

Put new tyres on as they will likely pick them if they are close to being done.

Cancel your appointment and sort out your issues first is my opinion.

Clint Visa is fine, but i dont think they take AMEX lol

Link to comment
Share on other sites

No camber wear at all

Should i just cancel in the morning then and sort the exhaust out before i go?

i dont wanna be wating the test mony and permit money to drive there to already know it will fail :thumbsup:

Link to comment
Share on other sites

Yeah gonna cancel the booking in the morning then and tell the guy why (shane ward bunbury)

No point going knowing its gonna fail!!

Do they have 2 cats or 1??

is 1 enoguh to pass?? if so which one??

Link to comment
Share on other sites

Just been checking the exhaust system out guys and here goes...

From the block to the manifold (extractors i think they are called here) that goes direct into the turbo

then out the turbo there is a twin neck pipe that goes into a 3" system BUT....

about were the handbrake is there is a smaller piece of oval shaped canister about 16" long is this the cat or a muffler middle box?? after that it carrys on with the 3" system...

Link to comment
Share on other sites

Were is xspeed??

I am in bunbury, that would be great though :(

what about suspension will that fail being too hard?

It's a workshop/garage just near Freo.

xspeed

If you want to use it just let me know and I'll tell 'em that you are gonna borrow it.

To be honest you would just be better off getting a hi-flow cat installed properly, but up to you.

Link to comment
Share on other sites

I had my R32 go into the pits with stock suspension, turns out front right was leaking so I replaced it with a full set of bilsteins. They were seriously solid. Got the same inspector twice and he passed me the second time. (Bear in mind I sent my old man on both occasions and didn't go)

Link to comment
Share on other sites

It's a workshop/garage just near Freo.

xspeed

If you want to use it just let me know and I'll tell 'em that you are gonna borrow it.

To be honest you would just be better off getting a hi-flow cat installed properly, but up to you.

I'm pretty sure hi-flow cats are illegal mate.

And yes that is your cat . On another note that wing is fkn huge, can you actually see out the rear view window with that thing there?

Edited by Dani Boi
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...