Jump to content
SAU Community

R34/33 Stuff


Recommended Posts

i need to get rid of these asap!

r34 gtt factory spoiler in black - $150

r34 gtt factory catback exhaust with gutted cat and twin pipes at the back - $80

r34 gtt factory suspension (no springs) and one of the rears has a leak - $50

r34 rear coilovers height adjustable leaking/need rebuild brand is "deed" - $50

r34 rb25 actuator - $50

r33 gtst factory side mount cooler with pipes - $50

r33 gtst clutch brand is nkk it is near new - $100

r33 gtst manual tailshaft - $100

r33 gtst flywheel - $100

r32 rb26 actuator - $50

r32/s13 3" diffback exhaust with s/steel cannon - $50

random front mount cooler core 760mm x200mm x70mm - $50

pair of bolt on spacers 20mm 5 stud 114.3 missing 7 studs but come with all 10 nuts - $50

located in melbourne

pics up soon

thanks

Link to comment
Share on other sites

forgot to add ive also got a random bucket seat, red in colour with black trim and its new/never used - $50

Champ do u have the tops for the suspension sitting round anyway? Bracket assembly / spacer / bushing rubber etc: the shit that you use to hold the springs on to the shocks. I'm just hunting the top assembly gear for two front shocks :D

yeah mate but i'd like to sell them with the suspension

can i have the pict of cooler core?

thanks.

post-31699-1257072228_thumb.jpg

did u have any r33 s2 castor rods? good luck with yr sale

nope :stupid:

and thanks

Interested in R34 standard suspension, how bad is leak and can these sort of leaks normally be repaired?

i havent had a proper look i just noticed that it was covered in oil when i took em out. pretty sure its repairable

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • There's probably an underlying issue with the A/C system too. I recently fixed mine, now it's fully control by the Haltech and car's factory HVAC controller  Have a squiz here:    
    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
×
×
  • Create New...