Jump to content
SAU Community

Recommended Posts

Hi im after 18 x 9 or 9.5 inch wheels to suit r32 gtr offset. MUST be 18s as they only just fit over the brakes ive bought. After something lightweight jap style rim, its going out on the track soon(hopefully). Love the CE28 style rim, ect.

Rubber not important.

If anyone has some awesome hookups on new items or quality secondhandies let me know

Thanks, Adrian.

Link to comment
https://www.sau.com.au/forums/topic/294385-wtb-r32-gtr-18-inch-wheels/
Share on other sites

I saw those, there perfect, only problem is pick up form Adelaide, im in Brisbane.

Hey mate,

I have the Emotion's in 18 x 9.5 +20 all round for sale.

Im happy to organise a courier if your happy to pay for it.

Send me a PM if your keen to discuss and Ill find out how much it would be to send your way. I still have the boxes for the wheels, If your looking for wheels only and no tyres this should be easy and wont cost much.

Cheers, Dan

Hi Mate

I have quite a few sets of new and used rims in stock to suit at the moment - if you're tracking the car, the 18 x 9.5" Advan TCII should be on your list - lighter than TE37s :(

  • 3 weeks later...
Still looking, would love to get something local.

I got heaps of stuff just in mate, CE28n, Brand new Work Emotion XT7 - will be taking pics over the next few days, but feel free to drop in :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hard to find reliable dyno results that help my selection   Thinking G30- 660 twin scroll 1.06   Problem is my current setup isn't imo terrible. This is the genuine flog it at the track tune so there is a few kws in it but pulled for track safety   Non VCT RB25DE home built and has baby 256 Poncams, 60mm throttle body. 90mm exhaust and decent ARC cooler with Emtron KV8 Would like to break 400rwkws on 20psi and want a bit more through the 4,000rpm range. New setup needs to beat attached dyno
    • Hey y'all, had some bad ball joints in my tie rods, so figured i'd just replace both inners and outers.  Went with the high-misalignment system from GKTech. My car's lowered so figured why not. M14 Super Adjustable Inner Tie Rod High misalignment S13 240sx/S14/S15/Skyline tie rod ends (12mm/14mm) Welp, took over a week to get the job done, but finally did. Took it on the maiden voyage today and... - The OE boots do not sit properly on the new inner tie rods - If you look at the photo in the link above, new ITRs are basically threaded all the way through the length of them, so best I could do was tighten the boot down with a screw-down hose clamp onto the ITR's threads. - There is a "whoosh"ing sound every time I turn the steering, seems like it could be coming from the air moving into/out of boots. Concerning, bc it'll likely pull in nasty shit from the outside when I turn... namely thinking of moisture. - Looking at the rack from the back of the car, under it, the left tie rod is straighter than the right. Right droops down a bit. - My alignment is way outta wack, that's expected. Taking it to get an alignment as soon as I can. - The big thing is that the steering isn't really "springing" back like it used to. Wondering if there's something tied to pressurization of the system that I managed to f**k up. This was supposed to be a 20 min job... why doesn't anything ever go right with these cars?
    • Thanks guys, toruqed down to 65ft-lb, or 88 n-m.  Now have other problems, will chronicle in another thread. You guys are the best, thanks for all the ugga duggas.
    • R serious becoming more of a weekend cars or collectors cars there are less on the road these days , but you sometimes come by one or two . we might have to start spotting the V serious to make up for the gap.  
×
×
  • Create New...