Jump to content
SAU Community

Removing Abs

a31rb25

By a31rb25,
in Four Door Family & Wagoneers

 Share

Recommended Posts

daisu Mentor

daisu

Posted
Posted

Remove the following,

Brake master, ABS unit, brake lines.

Replace above items with those from a non ABS model.

I would assume that S13 lines would fit the cefiro. You can use S13 brake master (or use an R32 brake master if you have skyline brakes).

Alternatively, getting lines made between the brake master and wheel wells won't set you back much.

Link to comment
https://www.sau.com.au/forums/topic/294530-removing-abs/#findComment-4914084
Share on other sites
adrnln Proficient

adrnln

Posted
Posted

Well I am looking at doing the same due to now spungy and gargling sound when brakes are applied ( Im thinking booster need replacing) and also to to piss off the ABS unit giving me some more room under to bonnet.

Here are a few pic I have taken of my ABS,

I can see two line coming out of the Brake Master going to the ABS unit and the two lines on the right are the ones going to the brakes. Now my understanding is if you cut and reattach those line taking out the ABS will this work? Or do you still need to replace the Brake Master.

post-5013-1257503087_thumb.jpg

post-5013-1257503105_thumb.jpg

post-5013-1257503133_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/294530-removing-abs/#findComment-4922236
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • funkymonkey
      Returning after a long time!

      By funkymonkey · Posted

      Por que no los dos? At least my euro brawler is reliable - unlike the JDMs I've had. Sheraaz you look familiar, did you ever come to an SAU VIC meet aaaaaages ago?
    • funkymonkey
      Phone photo thread

      By funkymonkey · Posted

      Drove to Cape Schanck to try to get a nice clear southern view over the ocean to see the lights a couple of days ago... instead got crappy cloud cover. Photo of a diorama of Hong Kong street scene. Taken on an iPhone 13 Pro Max.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      Stock RB fuel pressure is near enough 43.5 psi, so the latency in that table at 31.6 will be close. You can see that 7 or 8 psi equates to about 0.4µs extra latency. So if you wanted to interpolate between the 31.6 and 39.9 psi values you could say you're going up about 2 psi out of those 8, so add about 0.1µs, which is barely worth talking about and is quite possibly wrong because ideally you would fix the latency while running at the appropriate conditions on the dyno, with a wideband sniffing its butt.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      The pressure, is what you set the fuel pressure to. If you have the factory fuel reg, you'll need to find the factory spec. I don't know it off the top of my head, but someone else might.
    • MBS206
      Belt flex under throttle

      By MBS206 · Posted

      For others, what GTSBoy states here should be paid attention. Why? Well lots of people play with different engines, and they LOVE to change things like remove AC, or steering pumps etc, and it lends to them needing to move the tensioner too. You want your tensioner, particularly those that are sprung or hydraulically tensioned, to be the first thing after the harmonic balancer, or technically the "last" pulley in the chain. By saying last pulley, I mean look at the direction the crank spins when the engine is running, follow the belt from where the crank is pulling the belt FROM, and keep following that until you're between the last pulley/accessory on the belt and about to reach the crank again, this is the spot where you put the tensioner. This is the area that will always end up with slack. This is worked out exactly the same way for chains too, as the physics is the same for them. The crank pulley is where all the force to drag the belt around comes from. You will never ever get rid of the slack that appears, especially under load. The tensioners job is to keep the belt loose enough when stationary that there shouldn't be out of sync movement in slow movement, and then be tight enough when running, that the belt can't jump off any gear and get damaged. Too tight, bad things happen, too loose, bad things happen. Have a tensioner (mainly sprung/hydraulic one) in the wrong spot, it can't actually do anything about keeping the tension.
×
×
  • Create New...