Jump to content
SAU Community

xbox chip-ing in Perth


zanda
 Share

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Guest KILLER-T
Killer T,  

Do you do PS2 as well ?

No sorry i never got into playstation mods because they are a pain in the backside to work on.

summoner

You can play live with a on / off switch for your mod chip

Link to comment
Share on other sites

  • 2 weeks later...
Guest KILLER-T

It depends on what ver Xbox you have if its a v1 to 1.2 i can mod it for $50 if its a 1.3 i can mod it for $90 and if its one of the new 1.6 that comes in the beast pack i cant do it yet im still waiting on chips to come in sorry.I can install 80 gig HDD's for around $130 if you supply the drive $30 :P

Link to comment
Share on other sites

Guest KILLER-T
hmm damn i got a new 1.6

wats the difference between the versions?

The main thing they allways change is the config of the lpc header that the mod is fitted to eg on the 1.6 they have taken the 3v power away so most mod chips wont work without another power feed.All the info you need can be found at http://www.xbox-scene.com/.

Hope this helps you out a bit happy reading :headspin:

Link to comment
Share on other sites

  • 3 weeks later...

only reason why an executor chip wouldnt work on a 1.5 is if it didnt have the latest bios. Just add 2 wires to give it ground and 3.3v power.

also to people who are looking at getting their xbox modded, some people offer chips, and some do a software mod on the original bios. Its worth reading up on both before you chose what your doing.

Been using alladin advance and its a good option and reasonable price (and can be turned off to play on xbox live).

Dave

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
×
×
  • Create New...