Jump to content
SAU Community

Recommended Posts

Hey Guys,

Car is a R33 S2, stock bar Exhaust, FMIC and Pod. Today when i was driving, i gave it a little stab, then backed off. It was making popping (backfiring) noises whilst decelerating after that. So gave it another little stab, and it didn't do it as much, but as soon as i put my foot down on the accelerator, even 1mm, literally just touching it, it would make the same popping noise.

It was 37 degree day today, so not sure if that has anything to do with it. Car is due for a 100k service shortly.

I'll take it for another drive later and see if its still doing it, but any ideas in the meantime?

Cheers in advanced for any help.

Link to comment
https://www.sau.com.au/forums/topic/294673-weird-popping-noise/
Share on other sites

Still doing it. I think when i pull everything apart to do the timing belt, i might replace the O2 Sensor, get the AFM cleaned, wack a new set of plugs in her, and reset the ecu. Sounds to me likes its overfueling (My old 1JZ Z20 Soarer had a similar problem when we were adjusting fuel mixtures on the Wolf3d) so i'll see how that all goes.

If anyone else has any suggestions, let me know.

Still doing it. I think when i pull everything apart to do the timing belt, i might replace the O2 Sensor, get the AFM cleaned, wack a new set of plugs in her, and reset the ecu. Sounds to me likes its overfueling (My old 1JZ Z20 Soarer had a similar problem when we were adjusting fuel mixtures on the Wolf3d) so i'll see how that all goes.

If anyone else has any suggestions, let me know.

Most likely you are lean which could be for a ton of reasons related to timing issues ,fuel delivery system, intake leak, etc.

Also could be running too rich just when you accelerate then back off the throttle.

Getting boost issues? De-catted?

what your experiencing is 100% normal

wen ur foot is "1%" on throttle as u say, during deceleration, the injectors are spitting out a tiny bit of fuel that isnt fully combusting and makes popping noises in ur exhaust coz its combusting there instead

if its still doing it during deceleration, with ur foot fully off the accelerator, ur injectors r leaking tiny drops (possibly from the o-rings or internally)

has your fuel economy changed?

Completely normal for a lightly modified skyline, with some light taps of the accelerator on deceleration I can get some decent backfires. Under normal deceleration mine doesn't make to much noise, but because I always hell-and-toe to match RPM when changing down gears it's pretty typical to hear me pulling into slip lanes with a loud series of put-pop-pop-pop-put-pop-pop.

On cold nights with a well timed gear change it's not uncommon to get a decent "fwop!" kind of noise as the fuel in my exhaust ignites.

...stopped doing it???????????

OH NO! Now something has gone wrong!!!

lol ;)

Hahaha. Thats what i thought. :thumbsup:

But in all seriousness, i've been in quite a few RBs, and none of them made this noise. Oh well, she'll be right. :cheers:

I had the exact same issue a couple of days ago(when it was stinking hot)

The car was outside all day.

I found it hard to start, had to actually pump the accelerator pedal to get it to fire up

Would pop multiple times on low de-acceleration (1.5-2k rpm), it drove on boost fine.

Next morning it was back to normal again - I think it was heat soak.

I had the exact same issue a couple of days ago(when it was stinking hot)

The car was outside all day.

I found it hard to start, had to actually pump the accelerator pedal to get it to fire up

Would pop multiple times on low de-acceleration (1.5-2k rpm), it drove on boost fine.

Next morning it was back to normal again - I think it was heat soak.

Excellent.

could also be an exhaust leak somewhere. that is a common cause of popping on decel. a mate of mine had a cracked header in his falcon and it would backfire and shoot flames about 2 foot out the exhaust when he lifted off. was somewhat amusing to watch at night.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 馃槄
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 馃珷    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
  • Create New...