Jump to content
SAU Community

Recommended Posts

hey guys i'm torn between the castrol edge 5w-30 and the motul turbolight 4100 10w-40 for my next service. would like to know pros and cons for both and past experiences. i've read the oil thread and i know the motul gets heaps of good praise but i want to know about castrol edge more from the people that use it especially with the hotter months closing in.

another question i wanted to know is if castrol vmx 80 will be fine for my gearbox and if not what other alternative around that price range would be better? also what can i put into my diff?

i have a daily r33 gtst series II with 105,000kms. thanks

5w-30 will protect better when cold, but depending on the condition on the motor the hot rating might be too thin, you'll only know you have blowby issues is by going ahead and trying it.

5w-30 will protect better when cold, but depending on the condition on the motor the hot rating might be too thin, you'll only know you have blowby issues is by going ahead and trying it.

hi there guys, i'm facing the same problem choosing the correct oil for my v35 ,engine model vq25dd, hope one of you may be able to advise me of a suitable oil. I live in botswana and it's a similar climate, very hot, i have a choice of shell 25w-60w,15w-40w, castrol magnatic, havoline semi synthetic? which do you think i should use

hi there guys, i'm facing the same problem choosing the correct oil for my v35 ,engine model vq25dd, hope one of you may be able to advise me of a suitable oil. I live in botswana and it's a similar climate, very hot, i have a choice of shell 25w-60w,15w-40w, castrol magnatic, havoline semi synthetic? which do you think i should use

No other choices than the above 3 (I'd probably chooce Shell or Havoline, hate lowspec Castrol oil)?

If 25w-60 and 15w40 are the only options, then 15w-40 I would choose, 25w is just too thick when cold.

thanks for your input guys. ended up getting the motul.

been recommended vmx m and not the vmx 80. does anyone know the difference? also would like to know if the nulon 75w-90 semi synth smooth shift gear oil would be suitable. nulon suggests their 75w-85 100% synthetic but would liek to know if the semi synth will do fine?

Castrol Transmax M is used for automatics

Castrol Transmax M

A mineral oil based, general purpose, automatic transmission fluid for use in a wide range of automatic transmission applications

thanks for your input guys. ended up getting the motul.

been recommended vmx m and not the vmx 80. does anyone know the difference? also would like to know if the nulon 75w-90 semi synth smooth shift gear oil would be suitable. nulon suggests their 75w-85 100% synthetic but would liek to know if the semi synth will do fine?

its been proven before and if your gbox is in good nick stick to vmx80 and you will be fine

In a good condition RB25 I HIGHLY recommend Fuchs 10w30, Bursons stock it, Have been running it in the Stagea for 40k km, motor is cleaner, smoother, more economical than when i first got it, i have run motul once, wasnt a fan.

Their 10w40 is another option. Motul 300v I understand, but the lower end stuff I dont get the hype. Chuckie has had his oil regularly tested up to 20k km and the fuchs doesn't deteriorate.

Same, smells nice too.. :(

Had a workshop replace the transfer case for me, they put in decent gearbox oil but it doesn't like it, 4th and 5th synchros are a bitch. Going to dump it and go back to the vmx80 that I was running before without an issue.

Ive never had a problem with castrol edge, and ive been using it for about 1.5yrs now, I use 10w60tho. I believe some drift teams are sponsored by it and havent lost an engine.

I haven't had any probs with Castrol Edge 5w-30 for the 3.5yrs I've had my car. it's the only decent 5w-30 readily available off the shelf that i've found and it's the recommended weight in my manual.

my car is NA though.

it would be interesting to know how many of the above mentioned oils are actually certified as meeting there advertised spec. And viscosity as in the thickness is not the spec either. Should be running a SL spec oil or higher which is commonly a semi-synthetic at the very least. Check on the back of the packaging. If its not got the API stamp, then you dont actually know what you are getting and 80% of oils retailed off the shelf havent as it costs big dollars to have a product certified.

Repsol oils are what i used in my shop for 5 years for this reason.

post-20078-1257710244_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...