Jump to content
SAU Community

----- Fs Brand New Rb26/30 Combo Suit Gtr -----

GTR-31L
 Share

Recommended Posts

GTR-31L Enthusiast

GTR-31L

Posted
Posted

I have a brand new fully built and never started rb26/30 engine built to make 550kw+ with custom adaptor plate and 11L baffled sump and front diff setup for use in a GTR. It has only the best products used and alot of extra care taken in the build. If you are looking for the perfect BIG HP and reliable RB26/30 combo pretty much ready to drop in your engine bay, then you have found it! The torque of the 3L bottom end helps spools large turbos much faster than the 2.6L and provides MUCH more torque. This allows the motor to be very easy to drive in traffic on a daily basis but still produce VERY high hp reliably.

HEAD: RB26

Porting and chamber cc was done with 5 axis CNC Mill one of the first to be used for head porting in Australia, Porting EXACTLY the same as Keir Wilson's 8 second R32 GTR. The ONLY perfect port job, analysed and cut by computer, able to produce exactly the same result every time. Said to flow 1300Hp+

Head was disassembled back to bare casting, glass bead blasted, faced to.020', seats and valves 5 angle cut, debarred and rebuilt with all new parts

Tomei bronze valve guides- inlet and exhaust

Tomei type A valve springs

HKS 272 10.2mm lift camshafts inlet and exhaust

Mines Cam cover baffle kit (prevents oil being expelled into catch can)

Cam covers have -10 fittings welded to the breather ports

Chrome plated - Cam covers, cam gears, cam gear backing plates, Vacuum pipes that run behind cam gear backing plate

Porting and all head work performed by Bullet Cylinderheads in South Australia

Polished plenum, throttle bodies, runner...ect everything on intake side also included but not fitted as all ports and holes are tapped off and engine is in a sealed plastic bag for storage.

BOTTOM END: RB30

Tear dropped and balanced, ground and linished Crank, with grub screws, the journals have been machined down 10thou to ensure they are perfectly round and have the perfect clearances to run 550kw+, both the main and big ends are equipped with ACL race series bearings, and the crank girdle has been shot peened....

O ringed/ torque plate honed and line honed block, stainless steel O-rings, the girdle has been tunnel squared, and the deck skimmed to ensure it is perfectly square for the o-rings, engine has brass welsh plugs..head bolt holes have been drilled and tapped to accept 12mm ARP head studs...crank girdle has brand new nissan bolts which are actually the rb26 items so they are 12mm not 10mm and are longer also. The crank has the jun collar on the front for the later model oil pumps. N1 oil pump modded to run the external pickup needed for a rb30 in a 4wd setup. Ati super damper 1000hp harmonic balancer and power steering pully, Tomei oil restrictor.

REV forged 4340 chomoly I beam con rods with arp 2000 rod bolts...Arias 20"thou forged pistons with floating gudgeon, they are the lower silicon content items which are better for higher horsepower and boost pressures...they also have the spiral gudgeon clips which are a better design than some of the earlier circlip designs.

Compression sits at 8.4:1 with stock nissan headgasket.... (metal head gaskets should not be used with an 0-ringed block, the 0-ring prevents the gasket blowing out)

SUMP:

Now the sump is really amazing and took more then 35 hours of fabrication alone, holds over 11 litres of oil and has full trap doors and baffle system so you will NEVER suck air into your oil system (common nissan reason for spinning bearings) it has the external oil pump pickup in place (required for 4wd rb30's). There is also custom adapter to bolt the 2wd rb30 block to the 4wd rb26 sump and front diff assembly. The front diff is fully rebuilt with all new seals. Sump and adaptor plate made by Fitzpatrick Speed Works in Canberra

The engine and sump are painted in metallic silver and clear coated in a high temp clear coat, and looks really smick....especially with all the chrome work

The engine was built in Canberra by Matt Van Steinbeck, he is one of the oldest and most reputable engine builders this side of Australia and has been building race engines for 30 years. He is semi retired now and sold his own shop and works at

Fyshwick Head Services in Canberra which is one of the best machinist shops around that have alot to do with rb30's in conjunction with Jakes Performance

who Im sure you heard of if you have read many Zoom mags or know anything about dyno comps, both exceptional engine builders!!!!

Very similar spec motor to that used in Keir Wilsons 8 second R32 GTR (except Keir uses an OS giken RB30 block and crank and this motor uses a Nissan RB30 block and crank)

Have receipts

Selling for $14,800

Located in Sydney - Kellyville

Call Jake on 0404 080 448

[email protected]

Or PM me (but Im not on here all the time)

Link to comment
Share on other sites
GTR-31L Enthusiast

GTR-31L

Posted
  • Author
Posted

I spoke to the workshop it was built by and they build motors pretty much the same except dont run 0-rings, to much expense doing it and dont seem to have much drama's, also there is other machining stuff dont do any more cause the standard stuff seems good enough to take the power so this one will be awesome. A motor with those rods and pistons they had built is now making 740kw at the wheels through a 4wd auto with a borg warner turbo, thats an indication of the strength of the stuff in there.

Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      So I've been working on the car a fair bit, doing a lot of little things. Preparing some projects for this winter, as I'm taking 13 weeks off very soon for parental leave. Have my second kid on the way and he's due any week now. I'll need something to do while he's sleeping. I also usually take the car off the road in about a month and a half, until sometime around the end of March.  Still making slight adjustments to my tune, as the cold weather settles in. I've also had to start dropping boost and tire pressure as the weather gets cooler. It's getting very swirly at highway speeds. I drop to 20psi at 20C and 18psi spring pressure at 10C IAT's. I'm currently on 255 Falcon RT660's, but may look into running 275's next summer. They will fit, but barely. Might have to raise the rear a tad.  I'll start redoing my exhaust Monday, as I have the week off. I currently have an oval center muffler and cannon rear muffler. I've been told more then once from people behind me that my rear bumper is going to catch on fire one day. Seems I blow 5-10 second flames after doing a pull. No clue if that's the WMI, as I've never been able to do that before with other cars. I wanted to angle my tip down a tad so flames are pointed down and away from bumper. I also wanted to take the opportunity to reconfigure my exhaust line. I'm going to move my oval muffler to the rear with a pie cut angled tip and put in a new smaller round muffler in the center. I've rocked cannon mufflers on this car for the last few years and want to transition back the oval muffler look. I've also been looking for a stainless project to try out the new solar flux I bought. I'll post pictures on Monday, should be able to wrap that up in a day.  I'm also picking up another rear subframe this week. I wanted a second so that I could modify one with a gk tech anti squat reduction kit during the winter, and still be able to keep the car a roller so I can back it out of the garage if needed. I will also be caging it this winter. More on that later. Lastly, Speedtek still hasn't given me diddly squat. Every week for the last 4 weeks, they have been saying next week. They told me Friday to expect a shipping label that day to ship my two bad sets of ring and pinions back and nothing. There's definitely been more contact since I started destroying their company any chance I get on Facebook, but it's still just words without action.   
    • TurboTapin
      Idle issue rb20det

      By TurboTapin · Posted

      Have you done a pressure test on your intake/piping? Cleaned your IACV and Cold start valve?
    • r32-25t
      Spotted on the street....

      By r32-25t · Posted

      Bit of a dump of ones I saw on my trip. I also have a heap from daikoko but that’s technically not  on the street 
    • HYBRID VL
      KISLOC2 line output convertor for subwoofer in Q50/V37

      By HYBRID VL · Posted

      i was thinking that the 2 wires that go to the sub from factory has some sort of preamp like you mentioned and also a lo Pass filter to get just bass. now that will only use 1 channel and that really should be all i need for a sub? if i was trying to put a set of speakers in the back i can understand cutting into the left and right speaker wires. i will try how im talking about doing it and if that is crap i will do it the way of all wires. thanks for the input guys.  
    • Equilibrise
      M35 Stagea intake suction pipe

      By Equilibrise · Posted

      Challenging mig welding thin Aluminium pipe and trying to fit it in, having to bend and twist, but got there in the end. Fits really well and can easily get a socket wrench in there now to put it on/off. I'm in the middle of another project, so haven't installed the suction pipe yet. I'll post some pictures and results when i do.
×
×
  • Create New...