Jump to content
SAU Community

Recommended Posts

hey everyone selling this 33 on behalf of a mate , im selling it so all enquieries to me .

1994 r33 series 1.5

ARC smic

boost controller ( 13 psi)

3" dump back zorst

5 puck clutch ( 500 km old )

cusco swaybars

NEW brake rotors and calipers

New steering rack boots

New bushes ( upper )

shimmed r200 LSD

Lowered on RSR struts all round

HICAS disconected ( can just plug back in )

working mint AIR CON.

R32 gtst stockies with NEW tred

pioneer mp3 player,

Pioneer speakers front and rear ( sounds OK)

r33 4 door headlights ( chrome inserts)

nice gear knob

106,000 kms GENUINE.

R32 GTR brakes ( front and rear )

the body is almost IMMACULATE

the interior is also almost IMMACULATE.

only thing that doesnt work on whole car is drivers windw switch is dicky ( works most of time)

cash is required, so no swaps and for the price .. dont complain!!!

gota be one of the cheapest mintest 33 in adelaide.!

DOES NOT COME WITH RIMS PICTURED, comes with r32 stockies with NEW tires,

All enquieries to

Cam- 0410066210 or via PM.

IMG_0043.jpg

IMG_0044.jpg

IMG_0045.jpg

IMG_0046.jpg

IMG_0049.jpg

BE QUICK THIS WONT LAST AT THIS PRICE

$8650 ONO......

BARGAIN.

Link to comment
https://www.sau.com.au/forums/topic/294821-cheap-manual-turbo-r33-adelaide/
Share on other sites

DO NOT BUY THIS CAR!!!

This car is NOT as advertised. I had it checked by a mechanic today and it is far from 'almost immaculate'. I rang Cam on wednesday night and told him that I wanted a full comprehensive inspection done on the car before I bought it. He told me he had some friends that worked at Bridgestone Mt Barker and that they could do the inspection for me no problem. He even told me that they owed him a few favours and would do it for free. Now initially I was skeptical as this leaves you WIDE open to a very biased report on the car. The would be check on the car was carried out on thursday, I received an email from them and I spoke to a guy named Andrew that afternoon. I asked him what condition the car was in and he told me it was in really good condition. He told me that a lot of the suspension was new and the underside of the car had no damage, the brakes etc were really good and no dramas with the exhaust. I then asked about under the bonnet. He quickly pointed out that he had only done a safety inspection and that it didnt involve much more than checking to see if the car was drivable. He even mentioned that one of the guys did the report, took it for a test drive and found the car to be faultless.

Now a full comprehensive check on the car is what I was after. This was not done so I immediately found someone independant to do this for me. It was organised for friday at the cost of $199. I rang Cam to tell him I was not satisfied with the report and had organised for an independant mechanic to go over the car for me. Boy was he not happy. He immediately became extremely aggressive towards me telling me that the car was fine and that he was a licenced mechanic and had carried out all repairs to the car when it was needed and that he was saving me $199. I insisted it be done or I would not buy the car. By this stage he was yelling at me, telling me the car was in top condition. He did eventually relent knowing that he would not sell it without the full comprehensive check being carried out.

The car was checked out today at about 9.30am. The mechanic uncovered a number of big problems with the car, all the while being abused by Cam whilst trying to do his job. Andrew at Bridgestone Mt Barker lied about the condition of the car. He lied big time.

This car has been crashed multiple times, lots of damage to the chassis rails.

Front brake pads are at 5% on the left and metal on metal on the right. The right side rotor needs replacing.

Brake fluid needs replacing asap.

Left tie rods are worn and power steering fluid is low.

Head gasket has a leak.

Intercooler is damaged but working.

Air conditioning needs to be regassed.

Needs coolant.

L.S.D is not in good shape.

Front wheel bearings are audible.

Left guard is missing bolts and is loose.

rear window tint is half peeled off.

Car is not registered.

The controls for the right window and mirror do not work very well.

Left door jam has crinkle crazing on entire section.

On top of all this I could not get the vin/chassis or engine numbers from him no matter how many times I asked for a REVS check.. He has advertised the car as having a number of new parts that do not exist.

STEER CLEAR OF THIS CAR AND THIS PERSON!!!

actually mate ,

The dodgey mehanic that you payed knew nothing, NOTHING at all,

there is nothing wrong with the head gasket, AT ALL, ( checked this afternoon by cylinder head specialist)

there is no crash damage ( the car has had a respray)

your moechanic didnt even jack the car up mate,

I like to add how he can check if the LSD is in good condition without initiating wheelspin in my car while he was driving it without me. really profesional,

The car has 3 months registration mate,

Just becuase you trust some dodgey guy that rocks up in an old beaten up ute with bald tires and rust ..

i might also add he had NO tools at all on him .

you still owe me $50 for all the running around ive done for you, witch you PROMICED to pay me,

i would advise you to get someone else to look at the car mate, its JUST him,

the brake pads are also fine , i just had a look then , and ALL the suspension bushes have been inspected by a SUSPENSION centre, witch i trust more than ur dodgey mobile mechanic with no tools ...

Also mate, you have NEVER asked me for the vin number, not once, illl quite gladly give it to any buyer, along with current rego papers, engine number and ANY checks are welcome on the car ( as long as its a reputable person ) ....

The only thing that i have found out that has stopped working is the air conditioning mate, everything above the vehicle has .

Edited by 5LTBETR

also jsut tried contacting " patrick " above,

after numerous calls he finnallly answered on private number, shat his pants when he spoke to me, and hung up ..

very adult like mate . your my hero.

The whole reason you get a car inspected is for your piece of mind you dont have too buy it. You DO NOT need to black mail the seller of the car online which is completely un proffesional. I can personally vouch for this car as i have driven it myself. The car is 15 years old of course its going to have a phew problems, what car doesent? But seriousuly LSD not being fresh what the f**k? i know i dont want to pay someone to inspect my car to do burnouts. Cam has listed the car is the price it is as their is a phew little things that need doing.

All the best with the sale cam.

also jsut tried contacting " patrick " above,

after numerous calls he finnallly answered on private number, shat his pants when he spoke to me, and hung up ..

very adult like mate . your my hero.

Grow up Cameron. Most of your phone call attempts were during the day whilst I was at work. When you did ring it was close to midnight and you were hiding your phone ID. If you want to sell your car you must be genuine. No one expects a car of this age to be perfect and certainly not at that price. The mechanic uncovered heaps of problems that your mates at Bridgestone Mt Barker said did not exist. You have been extremely aggressive and abusive torwards me eversince I wanted the car checked by an independant mechanic.

Put the car on carsales. Some fool will come along and buy it without having it checked. You could have your mates at Bridgestone Mt Barker to help there again.

If I receive anymore phone calls or messages from you Cameron I will take the matter up with the police and file a charge of harrassment.

I think the moderators should close this thread.

Patrickd79 your a f*kkin tosser mate, what you have done is called slander but yet you will call police on cam, take ya mums tit out ya mouth and let go of ya dads penis seriously.

I too can vouch for this car, drives very nice for price asking.

g/l with sale

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...