Jump to content
SAU Community

Recommended Posts

Hi all,

Sorry for the long post but I wanna give as much detail as possible.

I have an R32 gtr which has been running fine until a couple of weeks ago. My problem began as an intermittent miss at high rpm's and this would only occur when the car had been running for over 20 mins. It wasn't anything real noticeable but I guess I should have taken it as a warning that something wasn't right.

Anyway this problem started to occur more frequently. It began to sound like it was running on 5 cylinders (a bit like a wrx sound) and lacked power but only when the car was up to temperature. I did a diagnostics test on the car and it was coming up with error code 21 which is the ignition signal system. Looking on the forums I saw that this could mean a few things were playing up with the most common thing I found being the ignition coils.

With the car running I couldn't see any arcing in the coils but before having a good look at them I inspected the spark plugs and found them to be in good condition however number 3 had carbon deposits on it. This made suspect that the number 3 coil was playing up.

Just to ensure that it wasn't the spark plugs I went out and brought a set of some cheap ngk's and put them in but the problem was still there. I then looked at the coil packs and could not see anything wrong with them from the outside, no cracks or distortion. For some reason, now I know it was probably a waste of money, I had it in my head it was the coil packs and went and brought a set of splitfires this was on Monday. Taking it for a drive it seemed ok at first but the problem showed back up.

On Tuesday I started it up and the problem was there as soon as I drove off but there was no miss while the car was idling. So it seemed to be getting worse. Today I took it down to Motortech in Wollongong and I have it booked in for tomorrow afternoon, there gonna put it on the dyno and see if they can diagnose the problem.

But this is where it gets interesting cause on the way home at certain points the car seemed to loose power, not completely shut off but just like it was being starved of fuel or something. I got it home and parked it in the garage and I could smell fuel. So now I'm thinking it's got nothing to do with the ignition and maybe more to do with fuel or the injection system. But I'm still getting error code 21 in diagnostics. Its beyond me what it is so I will leave to the guys at Motortech to sought out tomorrow.

Does anyone have any ideas what it might be?

Agreed, I had the same problem with my 32R. But would like to add another possible solution.

My GTR would stumble and felt like 5 cylinder running, only sometimes and sometimes worse than others. Try to accelerate out of it and it just bogged down. Tried plugs, oil, coilpacks, air and fuel filters, cleaned AFM's and none of this worked. I took out the AFM's and did the solder fix from the DIY section, this fixed it for a bit, well bandaided it then it started again but not as bad.

Took the coil pack loom out and checked it all and there were a few spots where there were splits in the insulation and you could see bare wire. Got out the trusty nitto tape and taped the whole thing up and problem has not come back in over 20,000KM.

You reset the computer after checking the code right?

You need to do a reset to see if the code comes back otherwise it will just stay there for eternity.

so every time you check it, it will say code 21.

well it's pretty hard to diagnose this type of stuff over the net, but if I had to have a stab in the dark going off your description of events I would wager it's actually a fuel pump issue. ignition is easy to check if its missing at idle it's easy to identify which cylinder has the problem. a bit harder if it's only doing it at high rpm. this is one of those things you will just have to work through testing things till you find the problem. luckily for you the car only needs 3 things to run. fuel, air and spark so it's just a matter of working your way through. :D

afm's FTW.

i had a similar problem.. everytime id go to overtake... it would die on me, not stall, just not make any power.. replaced the afm with a brand new z32 one and away she went... no dramas ever again.

afm's FTW.

i had a similar problem.. everytime id go to overtake... it would die on me, not stall, just not make any power.. replaced the afm with a brand new z32 one and away she went... no dramas ever again.

Agreed, was experiencing the same symptoms had a dodgey AFM replaced today and shes back driving smooth.

Ignitor is my thoughts. I had the same problems with my RB26 until i replaced the ignitor. Problem solved!

BTW RB26 ignitors are exactly the same as a RB20 or S1 RB25 ignitor. Try borrowing one to try.

You need to do a reset to see if the code comes back otherwise it will just stay there for eternity.

so every time you check it, it will say code 21.

Actually, only stays there for about 50 "start" cycles.

+1 for the ignitor. They tend to start misbehaving when they are old and they get a bit of heat happening. You might be able to diagnose it by putting a cold wet rag on the ignitor as soon as you get the problem - ignitor problems like this go away once the ignitor cools down.

Thanks everyone for their input, I ended up taking the car into motortech on Monday and he was able to confirm that it was the ignitor that was scattering the ignition signal.

Before I go and spend money on one though i am going to borrow a mates and see if it truly does fix the problem, hopefully it does.

Would faulty ignitor potentially ruin my new splitfires?

No they would be fine as the problem would be they're not getting enough spark. You would ruin coilpacks if you had way too much spark or if they were charging for too long which is not your case.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...