Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

This is what was actually written;

Hey guys,

Just got off the phone to Len at OG Speed shop, Who is on the Motorplex Committee..

I was told the Government just sold the proposed site to Delfin Reality-housing in a 'back door deal'...

Last weekend at the protest they said they would make it an election issue and today he says now they cant!

The committee has called this State Corruption at the highest level....

He also said to make things worse the council have blocked AIR from reopening the track under MrMikeRanns instructions.

well done Mike Rann

ironic, once it was made a political issue, the land was sold.

Lets see rann try and stop us finishing that track. :P

I still think we need to try and get a decent surface on the track before we start racing.

You'll have your car finished before we finish ours, which is a bit sad considering we started ours over 4 years ago.

Edited by D_Stirls

well i wouldn't want to build a house there.

I'm a civil engineer and AFAIK it's only suitable for an industrial area but delfin want to make some more money from another cramped development in a non suitable area so they get what they want because they have access to the back door dealings of the labour party. That drag strip would ahve brought in more money that the development will bring in.

Also do a liitle search on acid sulphate soils.

Edited by D_Stirls
well i wouldn't want to build a house there.

I'm a civil engineer and AFAIK it's only suitable for an industrial area but delfin want to make some more money from another cramped development in a non suitable area so they get what they want because they have access to the back door dealings of the labour party. That drag strip would ahve brought in more money that the development will bring in.

Also do a liitle search on acid sulphate soils.

Do you remember the swamp that is now West Lakes? Delfin turned that into a residential development by covering the swamp with landfill - ie rubbish. Worked a treat until the houses all started sinking a couple of inches each year. Think I'll take your advice and look for houses elsewhere.

^^ and the other issue of the QE2-sized turning circle :D

IMO the 380 was 10 x the Magna on almost all levels and that's not saying that late model Magna's had anything wrong with them either!

All Mitsubishi needed was to actually sell a few of the things and they wouldn'tve gone down the shitter... maybe :P

On topic, I've mentioned my views on this on NS, basically said a new development at Tailem Bend would be a step in the right direction, especially for those dedicated to go the extra distance to get there, but the people who the government want off the streets won't use it and the gov will continue to use this as a scapegoat for any real forward progress for motorsport in SA.

Edited by AndrewJZX100
All Mitsubishi needed was to actually sell a few of the things and they wouldn'tve gone down the shitter... maybe :laugh:

Sorry to go off topic..... I left there before they went down the shitter but if Holden, Toyota and Ford got the same treatment from the media Mitsi's got how long do you think they'd last...? Hell they almost can't survive already and they haven't copped the treatment Mitsi's got :D

i have to tow my silvia to lala from mclaren vale and i can tell you the main factor in me deciding if i going to go is the distance i have have to drive.

some times i just dont have the energy to get the trailer, load the car, strap it down, fill both cars with petrol and drive there and back to unload the car, drop off the trailer etc.

so i can tell you now, there is very little chance in me making the distance to the TB location if i am forced to tow a car there.

ill do what i can to get there but my job being so physical it really takes it out of me for anything :laugh: but i guess it is a step forward, kind of?

everyones making the move to mawson lakes :laugh: the new swamp

come join us, shrek lives here

f**k that. I work on houses in Mawson Lakes regularly. Pieces of shit, poorly constructed and will probably be lucky to last 10 years. No way would I ever buy/build there.

Onto the topic at hand.... It sure is a great distance, I can't see it being used enough to warrant them building it for that exact reason, it's just too far

D Stirls, as a civil engineer as you have stated, have you assessed the proposed land site for this Port Adelaide complex? Is it suitable?

Although this is a step on the road to a motorsport complex, isn't this one of the issues we are fighting at the same time..the distance from the CBD?

Sure, Tailem Bend sounds awesome and hey, if it got developed, heck i'd be out there, but still..its the distance from Adelaide. Yeah, its on a freeway and you are doing 110 (100 on your p-plates) but the fact remains, its a solid hour from Adelaide.

Maybe a silly idea, but in Poland, on Friday nights, they block off a section of public roads (used by people 24/7) have Police securing the site, 500 metres in length, with safety precautions, and hold drag races. The police happily have reported that there are less deaths on the road, speeding from the 17-25 year old category has decreased.

We need something closer. 30 minutes or less.

Also do a liitle search on acid sulphate soils.

*thinks back to hs chem*

ehm, naturally occuring soils that form in water heavy conditions, usually contain iron sulphide, benign when undisturbed but as soon as you expose it and it starts oxidising it forms sulphuric acid which in turn can cause the soil to start releasing heavy metals which combines with the sulphuric acid and starts degrading cement and metals... (on top of other environmental effects)?

been a few years, im probably a little off the mark.

(i only did chem to get a better idea on how to blow stuff up, end up learning a couple things though, lol)

Maybe a silly idea, but in Poland, on Friday nights, they block off a section of public roads (used by people 24/7) have Police securing the site, 500 metres in length, with safety precautions, and hold drag races. The police happily have reported that there are less deaths on the road, speeding from the 17-25 year old category has decreased.

ive got a better chance of having a 'one night in paris' sorta deal with megan fox than that does of happening in sa. we already have 1 legal street race in adelaide, cant have more.

We need something closer. 30 minutes or less.

also not going to happen, namely due to noise constraints, cant build too close or you end up with complaints and then curfews.

Edited by scandyflick

Has the Rann gov ever considered how much coin something like WSID/Willowbank or even EC bring in to a community?

Ever tried to get accomodation near Phillip Island near a major event?

The SA & VIC gov have helped to F_CK drag racing in each state with greed and the help of BOB!

The SA gov will never support any motorsport facilty by itself, you need to back door them.

Call it "a driver training facility". If they think one of those will buy votes, then watch how quickly one gets approved.

I could go on...............

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. I'm told as a chain breaks in it ends up regarding back about 0.5 a degree as the chain breaks in, making it bang on. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
    • Got the motor out and torn down. I'll be dropping off the block Monday. Luckily the scoring on Cyl6 is much less pronounced then the pictures made it out to seem. It can barely be felt. If you pass your finger over it 10x you'll barely notice it. Hopefully by some chance it will only require a honing. I'm not in the mood to buy one size larger pistons or another block. Oddly enough my 6th cylinder with the scoring has extremely clean intake valves compared to my other 5 cylinders. I'm worried the scoring was caused by too much fuel or Water/Methanol washing the cylinder. I'll review some old logs to confirm.  This was also the first time I pull an engine with the transmission still attached. It went much better then expected. I was worried my CD009 wouldn't make it easy due to its sheer size but it was much easier this way. 
×
×
  • Create New...