Jump to content
SAU Community

Recommended Posts

haha.. i jus unplug my battery or port the short breaker. even the pro's dont think oh hell his unplugged the battery. also removing a certain thing in the engine bay (not gonna say as i don trust you guys) will stop someone stealing ya car unless they tow it ofcourse but still good luck to them starting it. bahaha and no you wouldnt be able to steal it so dont suggest it unless you have a tow truck handy lol..

but regawrdless deck your car with alarms. and also get a throttle lock sits under the peddle and stops it from being pushed down meaning they can start it but not move it. they could easily remove it in 5 mins but hell in 5 mins id be there will a base ball bath and beating the life out of them.

Don't mean to hijack your thread, but im just curious how thieves get through conventional security devices, e.g. steering wheel locks and wheel clamps are they difficult to get past at all?

common tools will take care of most of them. not going into detail but a bit of thought into your question will answer it.

rekin,

pretty much summed it up there. I tend to look for the noise and then move on.

that wont stop anyone, a tow truck fixes that problem in 30 seconds or less.

Thats true but if they come unprepared there screwed. it will deter most thieves which would be a plus.but as everyone says if a pro wants your car he ll take it.also if they do get away with it the lock is a biatch to get off. but like i say no security is full proof

Edited by waza
  • 1 month later...

aye!!

i installed my immobilizer and in doing so pretty much found out how easy it is to steal one with out it, personally, immobilizer plus insurance is as far as im goin, itll stop dumbshits, and anyone smart enough to get round it will treat your car with absolute respect after they've stolen it :)

just try not to advertise your car as theft worthy. or have super sweet stupid alarm with theyll get by and the cops arent goin to be too much help once theyve made off with it neways.

DISCLAIMER

drunk whilst posting

  • 2 years later...

I also used to have this problem, and my work was pretty far away from my home so public transport was not an option. And doing nothing hoping for the bset is not for me either. I solved it for myself by applying Xeoma to monitor the parking lot. It's simply great ! now I'm feeling safe, go on and try it guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...