Gtr Won't Start

[phat25t]

My Gtr32 won't start since I replaced my radiator water pump and fitted a profec b ii. Now that i've reassembled everything the engine turns over but will not fire. My car is stuck in my garage so if anyone has any advice or has the time to have a look at it for a carton lol it would be a great help!

[GTS-t VSPEC]

Check you have spark.

[payback21]

+1^ fuel and wiring. These are normally the main things to check first.

BTW you live were?

[GTS-t VSPEC]

Most likely when fitting the Profec B you've cut or grounded a wire accidentally, which is causing the issue.

[payback21]

That is possible too

[stormtrooper]

Also check your CAS, if your car is kicking over but not firing could be the CAS

[phat25t]

I'm in leeming, Its definitely sparking, just had a look. Fuel pump cranks up when put into accessories, and started to smell fuel when I tried to start it.

[Neuroglider]

HAH leeming? seriously?

i live near there AND Passive (other chick on the forum) lives in leeming, if you needed a hand next week i could come around seeming as it's like 10 mins away from my place

but yeh.. wiring issue most prob

[heller44]

Check your wiring again.

If you still can't get it, I live just around the corner.

[phat25t]

Thanks guys, Ive got tomorrow and the weekend off so I'll have a look tomorrow and let you know how I go.

Cheers,

steve

[R32 GTS4 4DOOR]

hey dude, where are u getting to vacumn reading from? If u have tapped into the fuel reg lines make sure u have connected it up properly again.

[phat25t]

I'm completely lost now spent all morning checking it over, the vacuum line is connected to the fuel reg line and yeh I just made sure it's connected properly.

[GTS-t VSPEC]

You confirmed the CAS plug is on ?

[Scradly]

I replaced my radiator water pump

I take you have had the cam belt off to replace the water pump.

Are you sure you have the cam timing is correct.

Be where i would be starting.

[phat25t]

Cas plug is on, mate I wouldn't know where to start with checking the cam timing??

[Dsturbd]

Cas plug is on, mate I wouldn't know where to start with checking the cam timing??

LOL if you have no idea why do the job to begin with

[SimonR32]

lol thats scary!

[phat25t]

Because I didn't do the job I had someone do it for me who is away on holidays

[Scradly]

Ohh. Nice

Belt valves anyone. Did you actually pull the cam belt off. If you have and just put it back on in any spot and have no idea on how to check cam timing i suggest you get sombody with some knowledge on how to do the job correctly as cam timing is not somthing you want to f**k up.

Pm CERBERA on how to do the job , hes done a few.

[Scradly]

Best be speaking to the muppet that did the job then i guess.