Hosing for boost guage / ebc etc.

[jmp]

Where can I get some new hosing for all this stuff?

The hose I use from the wastegate to the ebc is a little short to mount the ebc properly..

I tried auto one in malaga but they didn't have any.. what's a good place? not really concerened about price..

cheers

josh

[GTS-t VSPEC]

If your not concerned about price then go to Worksauto in Bentley for it, if you want some cheaper then I can get some:D

[jmp]

hmm - how much am i looking at paul?

don't want to drive to works

[GTS-t VSPEC]

Depends on the sizing, I think Work is like $30 a meter, and the stuff I can get is about $15 a meter.

[zanda]

**** that!!!!

go to a hosing shop, and pay $2/m!!!

yellow pages is your friend!!

look for Pirtek. they also do the brass fittings and clamp-washers to make sure it doesnt leak.

[NO_RSPECT]

how much do you reckon braided line is?

its only out there if anyone has purchased any recently,

i will make calls tomorrow

[MarkR33]

mate i got my boost guage hosing from super cheap autos$ 3.45, nothing but the good stuff for my car , its good its cheap its not always called 'boost pipe' washer hose , u name it just look, in the piping section , cheap shit stuff paying 30$ for a bit of piping

[GTS-t VSPEC]

Hmm, I was assuming that Josh didn't want to have his engine bay look like it was bought from the $2 shop:p Yes you can get cheap hosing, and it looks like cheap hosing too:shake:

[jmp]

Yeah - I want it to look nice and tidy. Could become a show car if everything goes to plan early next year with the engine mods.

[Gradenko]

Hmm, I was assuming that Josh didn't want to have his engine bay look like it was bought from the $2 shop:p

Better simple black hose than getting blue/red/fluro yellow hose and having the engine bay looking like a riceboy explosion .

[zanda]

you get that rice.

bash it! Go Gradenko! Bash Bash Bash!!!

Gradenko: Protecting the world from the rice of the universe!

I'm with gradenko on this one. black is good. besides - for an accurate boost line I'd prefer a semi-rigid hose anyway. blue neon shit is too flexible.

[jmp]

just went to the local hose shop measured everything and got 1m insulated rubber hose and 2 clamps for $7.

Bargain!

[MattyB]

braided line is arround 40-80 per meter for earls. the fitting are arround 30-80 per fitting depending on the size and shape.

ive done all my lines, looks great but cost a fortune.

[MattyB]

braided line is arround 40-80 per meter for earls. the fitting are arround 30-80 per fitting depending on the size and shape.

ive done all my lines, fuel, oil, water (for turbo) oil cooler. looks great but cost a fortune. i have some left over for another item i want to add.

tried to upload a pic but doesnt seem to want to work. but anyone from perth is welcome to look at my car if you want to c what it looks like. the car is sitting at bently auto atm getting a jun style kit fitted. so if your near there an know someone whom works there feel free to drop by and have a look.

Matty B