Injector Into Fuel Rail

[KyussR32]

I've changed a leaking GTR injector on my RB20DET GTSt. According to this thread

http://www.skylinesaustralia.com/forums/Ch...nging+injectors

The injectors shold be hard to remove and replace? I had my new one cleaned and fitted with new o rings and it went straight in with no grease and almost fell out again.

A reputable performance shop did the cleaning etc, are they suppose to be easy to fit or hard to fit in so there is a good seal???

[noone]

My sard injectors in a stock rb26 rail were so hard to remove I thought I would bust em

sards are sposed to be a bit harder tighter fit

I think something may be a bit off there though

maybe wrong o-rings???

[KyussR32]

Thats my guess to, just wanted to check that this was the case. Might have to price up some from Nissan.

[kayR31]

I've changed a leaking GTR injector on my RB20DET GTSt. According to this thread

http://www.skylinesaustralia.com/forums/Ch...nging+injectors

The injectors shold be hard to remove and replace? I had my new one cleaned and fitted with new o rings and it went straight in with no grease and almost fell out again.

A reputable performance shop did the cleaning etc, are they suppose to be easy to fit or hard to fit in so there is a good seal???

hey mate i dunno if there the same but iv just changed my R31 injectors and mine were a bit of a pain to replace but they should fit in tight otherwise you will have another leak/ are you sure that they are the right ones for your car because they vary in size. hope it helps

[Craved]

also the bells on the fuel rail should be checked