Jump to content
SAU Community

help with changing front shocks!

_turtle_

By _turtle_,
in General Maintenance

 Share

Recommended Posts

_turtle_ Proficient

_turtle_

Posted
  • Author
Posted

update. ok i've got that damn bolt off now, used a long pole for extension and it finally came off. the shock is still not coming off, i've sort of moved it half way out, not i can't get it out and can't get it back in. is there anything else i need to do?

_turtle_ Proficient

_turtle_

Posted
  • Author
Posted

thanks for the replys guys. didn't finish it in time, so drove my mums car to work :D

only have to put it all back in now, already changed the shock absorber. bit worried about getting it back in as i had enough trouble just trying to take it out! gonna have to try some of the tips suggested. for any beginners out there wanting to change the shocks urself, i advise you to read all the tips!

cheers

_turtle_ Proficient

_turtle_

Posted
  • Author
Posted

ok getting the shock back on the car is even harder than taking it off!

i was afraid of this, was so hard to get off, now its even harder to get it on. i need to compress it like 4cm to get it on.

i don't have a small enough jack to fit underneath there.

blind_elk can u give us a bit more info on ur idea?

thanks.

_turtle_ Proficient

_turtle_

Posted
  • Author
Posted

yep, i've tried pushing the axle down, it helps but still can't get it on!

my poor baby is currently offline until i can fit it back on!

btw, i have spring compressors, but u can't use them to fit the shock back onto the car as there is not enough room there for them. are u suppose to still clamp the springs and keep it on wen u fit the shock back on?

thanks

JimX Grand Master

JimX

Posted
Posted

Jacks are the best way. If you don't have one, get yourself a trolley jack, they are really useful. Use it to put the car up on axle stands, then when it's on the stands, pull the jack out and use it to jack up the shocks. It's really easy once you do a few. Everytime you do them you just get naturally better at it and therefore quicker.

_turtle_ Proficient

_turtle_

Posted
  • Author
Posted

Hey JimX, i've tried to use the jack to jack up the shock, but theres really no room there for the jack. the axle etc are blocking the way to jack the shocks?

When you say trolley jack, u just mean the ones with wheels on it correct?

Sorry for the dumbass questions! This is VERY urgent atm as i've given up on it until someone has some new ideas which i can try. In the meantime i have no car :D

Theres no need to have the spring compressors on when u are putting the shocks back into the car right?

I'll upload some more pics tomorrow.

_turtle_ Proficient

_turtle_

Posted
  • Author
Posted

Bl4cK32, i am thinking! im thinking of who i can call to help me out! lol.

i want the axle to go down, not go up. if it goes up it makes the gap even greater and it will be harder to put on. any other ideas? i really hope this thread is closed soon.

heres a pic of the current situation.

JimX Grand Master

JimX

Posted
Posted

There is more than enough room to jack the shock up if the car is up on axle stands. And by trolley jack, yes I do mean the ones with wheels :) You just need to push the shock up in a kind of next-to position to the stud, and then kind of slide it over. It's pretty easy once you get it into the right position, which can take a bit of fiddling.

You don't need a spring compressor but it might help if you can't do the jack trick. Keep in mind that new shocks are pretty hard to push up on their own anyway so you might need the jack regardless.

JimX Grand Master

JimX

Posted
Posted

Turn the spring compressors upside down and squish the springs while you put the struts in. Then undo them when the strut is in place.

If you can't fit the jack in, it should be easy enough to use brute force to pull the suspension arm down a bit while pushing upwards against the shock and slide it onto the stud.

The more I think about it, the more I think I just used the jack for the rear and just used brute force for the front (no spring compressor for me).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • joshuaho96
      R32 GTR clutch master cylinder adapters

      By joshuaho96 · Posted

      Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
×
×
  • Create New...