Jump to content
SAU Community

Stagea Gps/dvd Conversion To English/australian Maps, Melbourne Based

macdog

By macdog,
in Victoria

 Share

Recommended Posts

macdog Veteran

macdog

Posted
Posted

Is there anyone (in Melbourne) who is able to change over GPS to English and australian maps without removing the dvd player/ reversing camera in a 2003 nissan stagea 250t RSfour? It's a panasonic Display unit model no TR-T70W2 and the dvd rom is a panasonic CN DV2200.

Cheers

PM me with price

macdog Veteran

macdog

Posted
  • Author
Posted
rip the unit out. you can re wire the reverse camera.

how easy is that to do TJ?

I've had a brief look, so take the dvd system out and leave the screen in yeah?

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

when i got my head unit installed, they cut the amp wire's and re wired it from the cut to match the Australian plugs to go into the head unit, so im still running factory amp and speakers and sounds good enough!

so i guess the same could be dont for otherthings.

macdog Veteran

macdog

Posted
  • Author
Posted
If Chris Rogers can do it, maybe he can reccomend someone down here who might be able to?

that sounds like a very good idea...

I want to get it done, and i also want to get GPS and everything hooked up...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Yeah. "New pump" does not have to mean "massive pump".
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Well, can you still get an OEM pump, and by the time you're buying a Nismo/N1 etc, just buy another aftermarket pump. It's better to have the pump able to flow more if its needed, than for your pressure to drop off. At any point in time, you're replacing the oil pump in a rebuild. Aftermarket pumps are likely going to be a better economical choice, and they don't have any negatives, even if they can flow more.   Also, when you're saying "replace the pump gears" are you meaning leave a 25+ year old housing in the engine with unknown wear, and just put new gears in? As that sounds silly to me, especially if you do have that minute amount of wear, that means your new pump gears now have a little bit more clearance beside them, which means, whelp, you may not get to build a lot of oil pressure or make a lot of flow.
    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      Right, but if you replace the pump gears + put a spline or sine drive gear on the crank on a Nismo/OEM/N1/etc pump at that point do you really still want more flow/oil pressure? Let's say this is a the aforementioned "keep it simple" build, no more than ~400 kW at the crank.
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Strength. And on the early RB26, full engagement of the pump drive.
    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      I really don't understand the point of aftermarket oil pumps if your particular engine doesn't need more oil pressure. As far as I can make sense of it the problem seems to be cavitation from sucking air, maybe the pump gear design with how it interfaces with the OEM crank, and maybe the backing plate screws wanting to loosen themselves. How does flowing more oil fix these issues?
×
×
  • Create New...