Jump to content
SAU Community

Adm Vs Jdm - Pros And Cons Of Each


Recommended Posts

Bad things about ADM's that I know of.

- No auto lights

The funny thing is this is only half true. The ADM cars don't have the lumnar dection system system true BUT if you leave your main lights on constantly the lights actually automatically switch off when you turn the car off (so they aren't left with the parkers on / give you a flat battery).

So I just leave my lights in the ON position 100% of the time and drive with the lights on during the day as well as at night.

That almost needed to go into the useless facts thread but I just thought I'd clarrify it slightly since it was raised in here.

:(

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

The funny thing is this is only half true. The ADM cars don't have the lumnar dection system system true BUT if you leave your main lights on constantly the lights actually automatically switch off when you turn the car off (so they aren't left with the parkers on / give you a flat battery).

So I just leave my lights in the ON position 100% of the time and drive with the lights on during the day as well as at night.

That almost needed to go into the useless facts thread but I just thought I'd clarrify it slightly since it was raised in here.

:(

this is the same system on my mum's 1991 soarer TT - the lights switch off once the car is off and the door opens - every time i borrow the car, i drive like this - "with the lights on" but mum does it oldschool

it's a good little system - however... if you have a turbo timer.. you get out - car running, close the door, car switches off but door doesn't open, meaning - lights stay ON

she's flattened the battery twice cos of my style of driving... which is like 90% my own fault thoguh

Just to confirm JDM R35 GTRs are still available to import as long as they were manufactured before 20 Feb, 2009. RVCS Entry No.: 477/01. I searched the website to try and find out the exact number of km allowed but wasn't able to find it.

One thing that no-one has mentioned is that JDM R35 GTRs can only be registered as 2 seaters. I know that the rear seats are tiny but with the ADM cars you are allowed to put a passenger in the back.

2 seaters? Can I ask your source on this?

Just test drove an ADM... boy...

FTG Nissan - 183k drive away Premium Gun Metal.

Funny thing is if you accidentially switch your traction control off (which would be VERY easy to do, it's right near the suspension change knob) then your warranty is void. So much for local support.

2 seaters? Can I ask your source on this?

Just test drove an ADM... boy...

FTG Nissan - 183k drive away Premium Gun Metal.

Funny thing is if you accidentially switch your traction control off (which would be VERY easy to do, it's right near the suspension change knob) then your warranty is void. So much for local support.

Just to clarify a point ,

there is a misonception out there that as soon as you turn the traction control off, the warranty is void.

The car doesnt lose the warranty by the flick of a switch.

What the warranty states is explicit instructions regarding the appropriateness of turning the traction control off which is if stuck in snow or mud.

Now if you chose to drive the with the traction control off and then for some reason damage the drivetrain. If that was directly attributed to your driving whilst " the traction control is off" then yes, chances are Nissan would reject your drivetrain warranty.

In saying that its not easy to turn off the traction control accidentally, you need to hold it down for a couple of seconds.

I think the whole VDC off thing (somehow causing damage and having warranty implications) is a bit of a furfy, surely. Think about it, wouldnt modulating the drivetrain (on-off-on-off) cause more drivetrain shock then just letting it spin freely? And yeah, the whole "turn VDC off and your warranty is toast" idea is just untrue. It's amazing how many misconceptions are out there with this car. I've given up trying to correct people when they expouse their GTR wisdom. One guy recently asked me if my 35 was the V6 or V8 version. I just told him V6. He went to some lengths to tell me the Jap version is V8... I just didnt bother. Anyway havent they revised the whole VDC off policy for the UK cars?

i believee you still can import the early model r35 GTR , as i get emails from prestiage and other guys selling JDM r35's

Jap R35 GTR around $122k landed ?!

aus spec R35 GTR $175 K on the road ?!

50 odd k difference....i know which one i would get.....

If I read correctly on the Prestige website, the prices quoted don't include luxury car tax, so you would need to add another 33% to the price. So if you pay $122,000 for the car it will end up around $160,000 with LCT. Is this correct?

If I read correctly on the Prestige website, the prices quoted don't include luxury car tax, so you would need to add another 33% to the price. So if you pay $122,000 for the car it will end up around $160,000 with LCT. Is this correct?

i think LCT is applied over the threshold (dunno if it's still $57k?) so not quite, no.

I think the whole VDC off thing (somehow causing damage and having warranty implications) is a bit of a furfy, surely. Think about it, wouldnt modulating the drivetrain (on-off-on-off) cause more drivetrain shock then just letting it spin freely? And yeah, the whole "turn VDC off and your warranty is toast" idea is just untrue. It's amazing how many misconceptions are out there with this car. I've given up trying to correct people when they expouse their GTR wisdom. One guy recently asked me if my 35 was the V6 or V8 version. I just told him V6. He went to some lengths to tell me the Jap version is V8... I just didnt bother. Anyway havent they revised the whole VDC off policy for the UK cars?

He is probably confused with the non-road going GT500 race car.

Eg. http://www.motorauthority.com/blog/1025370...ered-gt500-gt-r

Ah okay, so it would be $140,000 or close to that.

Still a $40,000 saving over Aus delivered.

Don't forget that the resale will be less as well....so it will only help someone that can't raise the RRP for an Aust Delivery....

Considering that I have full Local Dealer support/warranty and better resale value .......

He is probably confused with the non-road going GT500 race car.

Eg. http://www.motorauthority.com/blog/1025370...ered-gt500-gt-r

Maybe, but seemed to think you could buy a v8 for the raod (and asked which one mine was!).

Lame.

  • 1 month later...
  • 4 months later...

Bit of thread mining, sorry.

Can anyone confirm the MP3 capability of the 2009 ADM cars? Will it take a CD or DVD with raw MP3's on it?

Or do i need to burn a regular audio CD?

If regular CD only, how have you gone with burning CD's, some cars/audio systems want them burned in a specific way (slow burn rate) otherwise they dont work too well. Anyone?

Edited by LSX-438
Unfortunately you have to burn an audio cd I think which limits the number if tracks

I used iTunes to do it/toast for mac

Mark,

i burnt a data CD (with MP3's) and it works ok (!!).

i noticed it takes a while to start (like 15~20 seconds) - it must be doing something to index or analyse the files, but it works. So this means we can put 100+ songs on a CD i suppose, whohoo! easy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
    • Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
×
×
  • Create New...