Jump to content
SAU Community

Bp Ultimate Does Work

FlyingEL
 Share

Recommended Posts

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
Sorry my fault mixing english working out with aussie!!

How many litres more are you getting to a tank??

??? :( Don't think it is possible to get more Litres in his tank... maybe more km's to the tank is what you mean?

Edited by iamhe77
FlyingEL Rising Star

FlyingEL

Posted
  • Author
Posted

I have been travelling to the same site for work the pass few months and weekly I pump petrol at te Shell station, and always pump on wednesday when the fuel is the cheapest. $40-50, is the usual amount I pump, but after using BP for 2 weeks, I only manage to pump $25 he 1st week ( not much driving, only work) and $34 this week (driving more than usual). I was shocked. The car feel more torquey in the mid range.

xscape237 Rising Star

xscape237

Posted
Posted

In all my previous cars i could never ever notice a difference between shell, mobil and bp. I used to think that those people who had a preference were simply crazy.

However, I have to say that my V35 feels as though it does not like shell v-power. I have swapped between the two several times and BP consistently feels better.

I dont often get to a mobil station but the times that i have it has felt the same as BP.

mosoto Proficient

mosoto

Posted
Posted

I've used BP ultimate for about 3-4 yrs now so tbh i can't remember what sort of FE I was getting before hand.

But then my daily is a 5.7 litre so I try to not think about the 350km per tank I get.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...