Jump to content
SAU Community

Anyone Knoe Whats Wrong?

SEEYOUBYE
 Share

Recommended Posts

gazza750 Veteran

gazza750

Posted
Posted
people actually care about spelling?? wtf

seriously who gives a shit...

sorry wrote this in a rush as i was walking out didnt realize i didnt mention the problem =]

i can shift into all gears with the engine running without even putting the clutch in but the cars doesnt move nuddaz

by the way i dont drive a 33...

Yes because we are Adults we do care about spelling

check your propeller shaft is spinning whilst car is in gear and eliminate things from there .

If prop shaft spins it will probably be diff or rear axles snapped

If it does not spin it could be the main shaft or idler shaft in gearbox

Benzino33 Experienced

Benzino33

Posted
Posted
people actually care about spelling?? wtf

seriously who gives a shit...

sorry wrote this in a rush as i was walking out didnt realize i didnt mention the problem =]

i can shift into all gears with the engine running without even putting the clutch in but the cars doesnt move nuddaz

by the way i dont drive a 33...

huh? now im more confused

SEEYOUBYE Rookie

SEEYOUBYE

Posted
  • Author
Posted
OK, my bad, I just read some more of your posts, and you drive an R32?

Dude, wtf ?

Mods should really just delete this entire bad example of a thread before a cop reads it.

yeh bro algee

but yes 32 it is

honestly i really dont know a whole lot about these hence why im probably asking stupid crap haha

would a r32 gtr box fit in or is the bell housing a different size? or is the box completely different as a gtr is awd?

cheers mahn

JonnoHR31 Grand Master

JonnoHR31

Posted
Posted

completely different. jack up the back of your car, put it in gear and let it idle, have a look under to see if the tailshaft is spinning, if it is, see if your halfshafts are spinning.

SEEYOUBYE Rookie

SEEYOUBYE

Posted
  • Author
Posted (edited)

haha quite funny fellas but i think thats next week.

i see you have nothing better to do then post stupid SHIT on the net ae

but seriously i asked for advise not grown people trying to act like kids and be funny if i wanted that i would go watch the wiggles

Edited by SEEYOUBYE
Nic_A31 Grand Master

Nic_A31

Posted
Posted

SAUWA isnt known for intelligence or maturity to start with but I think their response is more so a cold shoulder because you admit you f**ked something up while being an idiot. You've been told what to check, have you done that yet man ?

Dorigecko Proficient

Dorigecko

Posted
Posted (edited)
haha quite funny fellas but i think thats next week.

i see you have nothing better to do then post stupid SHIT on the net ae

but seriously i asked for advise not grown people trying to act like kids and be funny if i wanted that i would go watch the wiggles

ffs your goddamn car isn't moving. FIND OUT WHAT IS WRONG instead of asking what's wrong. because unless you want these dumbc*nts to come round to your house and look at your car for you, and probably steal all your shit in the process, only to leave having even less of an idea of what is broken on your car, with a strange feeling lingering like you've just been arse-f**ked with the hot air from their gobs, i suggest you jump under your car, chuck it in gear with the engine running and see if the tailshaft is spinning.

Edited by Dorigecko
bubba Grand Master

bubba

Posted
Posted
ffs your goddamn car isn't moving. FIND OUT WHAT IS WRONG instead of asking what's wrong. because unless you want these dumbc*nts to come round to your house and look at your car for you, and probably steal all your shit in the process, only to leave having even less of an idea of what is broken on your car, with a strange feeling lingering like you've just been arse-f**ked with the hot air from their gobs, i suggest you jump under your car, chuck it in gear with the engine running and see if the tailshaft is spinning.

wut?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Butters
      UniClutch

      By Butters · Posted

      Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • joshuaho96
      R32 GTR EV? The leaf of the Godzilla's!

      By joshuaho96 · Posted

      Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • Duncan
      Rv37 400r questions

      By Duncan · Posted

      My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...