Jump to content
SAU Community

Anyone Knoe Whats Wrong?

SEEYOUBYE
 Share

Recommended Posts

gazza750 Veteran

gazza750

Posted
Posted
  SEEYOUBYE said:
people actually care about spelling?? wtf

seriously who gives a shit...

sorry wrote this in a rush as i was walking out didnt realize i didnt mention the problem =]

i can shift into all gears with the engine running without even putting the clutch in but the cars doesnt move nuddaz

by the way i dont drive a 33...

Yes because we are Adults we do care about spelling

check your propeller shaft is spinning whilst car is in gear and eliminate things from there .

If prop shaft spins it will probably be diff or rear axles snapped

If it does not spin it could be the main shaft or idler shaft in gearbox

Benzino33 Experienced

Benzino33

Posted
Posted
  SEEYOUBYE said:
people actually care about spelling?? wtf

seriously who gives a shit...

sorry wrote this in a rush as i was walking out didnt realize i didnt mention the problem =]

i can shift into all gears with the engine running without even putting the clutch in but the cars doesnt move nuddaz

by the way i dont drive a 33...

huh? now im more confused

SEEYOUBYE Rookie

SEEYOUBYE

Posted
  • Author
Posted
  Nic_A31 said:
OK, my bad, I just read some more of your posts, and you drive an R32?

Dude, wtf ?

Mods should really just delete this entire bad example of a thread before a cop reads it.

yeh bro algee

but yes 32 it is

honestly i really dont know a whole lot about these hence why im probably asking stupid crap haha

would a r32 gtr box fit in or is the bell housing a different size? or is the box completely different as a gtr is awd?

cheers mahn

JonnoHR31 Grand Master

JonnoHR31

Posted
Posted

completely different. jack up the back of your car, put it in gear and let it idle, have a look under to see if the tailshaft is spinning, if it is, see if your halfshafts are spinning.

SEEYOUBYE Rookie

SEEYOUBYE

Posted
  • Author
Posted (edited)

haha quite funny fellas but i think thats next week.

i see you have nothing better to do then post stupid SHIT on the net ae

but seriously i asked for advise not grown people trying to act like kids and be funny if i wanted that i would go watch the wiggles

Edited by SEEYOUBYE
Nic_A31 Grand Master

Nic_A31

Posted
Posted

SAUWA isnt known for intelligence or maturity to start with but I think their response is more so a cold shoulder because you admit you f**ked something up while being an idiot. You've been told what to check, have you done that yet man ?

Dorigecko Proficient

Dorigecko

Posted
Posted (edited)
  SEEYOUBYE said:
haha quite funny fellas but i think thats next week.

i see you have nothing better to do then post stupid SHIT on the net ae

but seriously i asked for advise not grown people trying to act like kids and be funny if i wanted that i would go watch the wiggles

ffs your goddamn car isn't moving. FIND OUT WHAT IS WRONG instead of asking what's wrong. because unless you want these dumbc*nts to come round to your house and look at your car for you, and probably steal all your shit in the process, only to leave having even less of an idea of what is broken on your car, with a strange feeling lingering like you've just been arse-f**ked with the hot air from their gobs, i suggest you jump under your car, chuck it in gear with the engine running and see if the tailshaft is spinning.

Edited by Dorigecko
bubba Grand Master

bubba

Posted
Posted
  Dorigecko said:
ffs your goddamn car isn't moving. FIND OUT WHAT IS WRONG instead of asking what's wrong. because unless you want these dumbc*nts to come round to your house and look at your car for you, and probably steal all your shit in the process, only to leave having even less of an idea of what is broken on your car, with a strange feeling lingering like you've just been arse-f**ked with the hot air from their gobs, i suggest you jump under your car, chuck it in gear with the engine running and see if the tailshaft is spinning.

wut?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...