Jump to content
SAU Community

Recommended Posts

Ok It is a silvertop rb20 conversion into silvia. All wiring is done. When cranked it will cough and fire on 2-3 cylinders then nothing for a couple of secs then maybe 4cylinders then it floods and will only fire on 1 or 2 there after. I have had plugs out and earthed out. All six spark. Did the same with the injectors they all work. Remove plugs and they are always black. I have a constant 12v at aic and aac and both signals run back to ecu. I also have the orange wire that remaps the ratio at cold start hooked up correctly. I also have an r33 fuel pump. There are no boost leaks. I cant work it out. Any help would be awesome thanks guys

Link to comment
https://www.sau.com.au/forums/topic/296349-rb20-wont-start-can-anyone-help/
Share on other sites

What ECU is running this engine? Are the injectors the factory set, or hi-flow aftermarket types? What fuel pressure is it running?

Try giving it some throttle at start (allow more air into the cylinders).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...