Jump to content
SAU Community

Recommended Posts

Just put in a z32 before I take it to get tuned it idles fine just a quesiton in the faq it says about adjusting the AJR vaule in the IGN/INJ settings until you see abit of black smoke I have put the vaule up to about 1.40 but I still do not see any smoke does any know of roughly how much higher the AJR vaule has to so I can have a guide to how high I have to go the get black smoke.

Edited by skline01999
Link to comment
https://www.sau.com.au/forums/topic/296570-temporary-z32-settings-power-fc/
Share on other sites

have you selected the z32 afm? Personally i'd just do that and leave the injector correction alone as on cruise the closed loop will get the mixtures right enough for you to drive it. Just keep it off boost and you'll be fine.

leave it alone then mate. I think you are being overcautious by trying to richen it up.

I generally just leave the injector correction a couple of % on the low side so it gets a bit of extra fuel that way.

yeah the z32 is selected it idles perfectly with the z32 and new injectors so just got to drive it now to get tuned

It should be fine, just dont get to spirited ;) Most of the time they are safe enough till load point 10 or so.

alright thanks guys. Trent I want to get my car tuned at your workshop sometime in December have you got any time? Ill ring to confirm the date as soon as I find out when my dad has a day off so he can drive my car there since I dont have my license back yet

alright thanks guys. Trent I want to get my car tuned at your workshop sometime in December have you got any time? Ill ring to confirm the date as soon as I find out when my dad has a day off so he can drive my car there since I dont have my license back yet

im sure we can squeeze it in sometime.

+1 to not upping fuel more than you need too.

In the 7 or so kilometers to the tuner I managed to foul my plugs because I was worried about it running too lean. Ended up costing me more as I need to get a touch up tune done at the boost levels I was looking for without any misfire.

Edited by Kwyjibo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...