6sp Getrag Into My R34 Gt-4

[Luke_ENR34]

Hey guys

Im putting a BNR34 RB26 into my car within the next two months and was just wondering if i bolt the 6sp Getrag up will all my rear diff ratios be ok to handle it?

Front diff will be stock GTR

The car is a R34 GT-four so 4wd no hicas.

I got no idea when it comes to this stuff.

Cheers Luke

[R34GTFOUR]

You'll have to change the rear diff to the same ratio as your front diff since the stock gt4 is different. So in essance you need a r34 gtr rear diff.

[Luke_ENR34]

Would a GTR diff bolt straight in, or would u need the shafts etc?

[R34GTFOUR]

You need the shafts, the rear diff in ours is the same as a r33 gts (2x3 bolt pattern) where as the gtr is the same as the gtst (5x1 bolt pattern). Unfortunately (or fortunately depending how you look at it), the gtr shafts are thicker so you need to run gtr hubs aswell.

I'll be doing a gtr diff swap in mine aswell (only using the r32gtr diff though), but the hubs and shafts should be the only other things needed.

[Luke_ENR34]

Cool, Got a whole BNR34 subframe with everything already just didnt know if i needed to put it in or not yet.

Thanks heaps.