Jump to content
SAU Community

Recommended Posts

I've had my air con re-gassed twice in 2 years and i've had auto elec's look at it and try to work out what the problem is but no one seems to be able to tell me.

I have seen a couple of posts on here about ideas for air con's that aren't working, but mine works just not very well at all.

Can someone please help me as we are having 40 degrees every day this next coming week.

Link to comment
https://www.sau.com.au/forums/topic/296920-r32-air-con-issue/
Share on other sites

not sure what is mentioned in the other thread, but possibilities are the dryer is dead, the condenser is dead, there is a heap of debris between the condenser and the radiator reducing airflow, the thermostat is shot, or the temp sensor for the unit is dead.

ive got the same problem ive only just got my air con regassed, lines remade and every thing works.

when its parked in the shade (even on a warm day) the air con blows out hot air. but when its parked out in the sun (on a warm day) it blows out warm air.

also my vents wont cycle, theyre stuck on front window demister.

any one know the problem? any help would be appreciated

ive got the same problem ive only just got my air con regassed, lines remade and every thing works.

when its parked in the shade (even on a warm day) the air con blows out hot air. but when its parked out in the sun (on a warm day) it blows out warm air.

also my vents wont cycle, theyre stuck on front window demister.

any one know the problem? any help would be appreciated

Just wondering how it cost you to get the lines remade. If have removed my turbos from my gtr and one of the lines have bubbled and who did you use?

Cheers

Just wondering how it cost you to get the lines remade. If have removed my turbos from my gtr and one of the lines have bubbled and who did you use?

Cheers

cost me roughly 350 for new lines and a regass he also replaced something else but i dont know what its called. its a little cylinder.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update for the sake of closure   Ended up getting the intercooler piping all sorted, new plugs and yellow jacket coils, and she was idling mint until it warmed up while I was bleeding the cooling system. Found the misfire to be localised to cyl 3 by unplugging coilpacks, ran a compression test, that checked out, then decided to get a mate to check if that spark plug was firing out of the motor. Upon cranking it over, with the injectors disconnected, the car actually fired and ran on a couple cylinders and heaps of fuel came out the top of cyl 3 I'd say that injector's either spraying incorrectly or spraying far too much, which is fine as I'm planning on replacing them anyway I'm planning on making about 250kW on flex fuel, and have a set of 1000cc injectors from ozautosport, obviously overkill but I'm planning on building the motor and running more boost further down the line, do you reckon they'd be too big for a smooth idle on 98? Thanks for the replies gents, much appreciated
    • I'm confused. You said you want to "remove the clear coat from most panels" but it sounds like you are actually doing a full respray? Few random things to add -  If you chase the blistered paint with 120 grit, I can almost guarantee you'll chase it down to bare metal (that's fine). But if you paint the car from here, you'll have nice little indents where ever the blistered paint was. The new paint won't magically level out the low areas, you need to fill them. Which leads me to the main point I wanted to add, make sure the whole car is flat before you paint it. All those areas with blistered paint you sanded out, make sure to fill them and triple check they are flat with a block guide coat. I'd also check the whole car is flat with a large block and guide coat but yeah up to you if you want to go that far.   
    • 300hp (225kw) is barely outside the standard turbo's range with a bit of extra boost in it (200ish). If you are going to change the turbo you should aim for 250-300kw (330-400hp) to make the expense worthwhile
    • A couple of things, firstly omg that turbo is expensive! $3,000 USD for dinosaur technology is robbery. You could buy a G series turbo and have a good amount of change instead.  If you want a good budget option, have a look here - https://hypergearturbos.com/product/rb25dethighflow/ If you are keen to spend more, have look at the modern turbos, Garrett G series, Borgwarner EFR, etc. Have a look at the RB25 dyno results thread for inspiration.  If you upgrade your turbo to something that will support the 300hp you want and only "probably" have Haltech ECU, your car will only "probably" run. Actually, no it won't run. You are going to need the ECU and injectors at the time you do the turbo upgrade.  No thoughts on "this much boost" as you didn't say how much boost that actually is. Having said that, plenty of unopened RB25's making even more power then what you are chasing.   
×
×
  • Create New...