Jump to content
SAU Community

Recommended Posts

Had a nice, white r30 a few years ago. Unfortunately govt took it away. Looking to replace it as fun car for weekends - intend to restore and perhaps add multi-throttle body injection (just to make sure I'm not starving it of air and fuel you understand).

Am after a standard r30 4 door sedan with a manual gearbox and L24E - it must be a six. Something that's a days drive from the ACT would be nice too (not too interested in WA or NT cars - QLD cars could be OK).

Also interested in any insight as to why there's no r30s around for sale anymore and, of those that are, why they are snapped up so quickly? Saw a post here suggesting the poor things get bought and stripped for bits that are in demand in the Mid-East. What a waste!

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/
Share on other sites

Had a nice, white r30 a few years ago. Unfortunately govt took it away. Looking to replace it as fun car for weekends - intend to restore and perhaps add multi-throttle body injection (just to make sure I'm not starving it of air and fuel you understand).

Am after a standard r30 4 door sedan with a manual gearbox and L24E - it must be a six. Something that's a days drive from the ACT would be nice too (not too interested in WA or NT cars - QLD cars could be OK).

Also interested in any insight as to why there's no r30s around for sale anymore and, of those that are, why they are snapped up so quickly? Saw a post here suggesting the poor things get bought and stripped for bits that are in demand in the Mid-East. What a waste!

No, it's the 240K off to the middle east..

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4947686
Share on other sites

Hi,

This one's in Qld. No sale on eBay ($500). 450000km! http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=320447023271

In Victoria (and listed in this forum recently). 344000km. http://ozdat.com/forum/viewtopic.php?f=53&t=19879

Another one that didn't sell on eBay ($1200). 160000km and in NSW. http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=280409408908

All are manual, L24E.

JH

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4947856
Share on other sites

Hi,

This one's in Qld. No sale on eBay ($500). 450000km! http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=320447023271

In Victoria (and listed in this forum recently). 344000km. http://ozdat.com/forum/viewtopic.php?f=53&t=19879

Another one that didn't sell on eBay ($1200). 160000km and in NSW. http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=280409408908

All are manual, L24E.

JH

Thanks for this JH. My old white R30 was a car i converted from auto to manual. Shell had about 200k on it, the driveline donor had about 450k on it. Gearbox was servicable but a little noisy, drive shaft nearly killed me. It was only a few ks from snapping at the first uni joint after about six months.... The massive vibration through the car was the only sign. I might keep car one in mind though.

The vic one looks v nice. As does the NSW example. Might give owner of the NSW one a call tomorrow to see if its still available.

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4949012
Share on other sites

ive got one...but its not for sale! and i'm in WA.. but i could be persuaded :D

they just rust out too quickly!

Every man has his price eh?

I've found a few nice samples in WA when searching in the past, but its just too far away!

Tried to check out pics of yours but was too retarded to find it on flickr pg.

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4949040
Share on other sites

Hi,

This one's very interesting (not L24E though). http://www.skylinesaustralia.com/forums/Sa...nv-t293969.html

However it's in SA. Just out of curiosity I got a few transport quotes. Best quote Adelaide to Melb (for the car only) was $180 with TNT.

JohnH

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4949134
Share on other sites

I replaced a heap if lines when it was a project car back in 2007

that line depcted is for a vac guage i had to see what stuff was doing at different revs, I was trying to diagnose the kickdown revs/pressure etc. it sometimes used to kick in and out of overdrive and was friggen annoying.

The line was a recycled washer line from a wreck!!! doesnt like the heat...

Yes Auto, full manual convrsion sitting in the garage on the parts car

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4950261
Share on other sites

  • 2 weeks later...
Hi,

This one's in Qld. No sale on eBay ($500). 450000km! http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=320447023271

In Victoria (and listed in this forum recently). 344000km. http://ozdat.com/forum/viewtopic.php?f=53&t=19879

Another one that didn't sell on eBay ($1200). 160000km and in NSW. http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=280409408908

All are manual, L24E.

JH

Success!

I bought the 160k NSW $1200 one on the weekend. Many thanks to the vendor (who must surely be on this forum).

It is eff-off straight, appears to be completely intact and drives like a dream (albeit a slooooow dream). It is essentially a one owner car. It is so good, I'm actually reconsidering the more extensive and expensive plans I had for it.

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4967821
Share on other sites

Mag86, had a look for you at the show and shine by the lake a couple of weekends ago. Hung around the car a couple of times, poked and prodded it to see if you'd turn up, but you must have been busy looking at other cars.

you sure do have a nice Skyline, it is as you say immaculate. Good luck with the conversion. Let me know what parts out of the donor car you don't want.

Also, what to people think of the parts thread? Some of the posts are a bit old now. Any comments on good places to get R30 parts in 2009?

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4967834
Share on other sites

...Also, what to people think of the parts thread? Some of the posts are a bit old now. Any comments on good places to get R30 parts in 2009?

Congrats on the car. Interested to know what plans you have for it.

The forum is a good place to find parts. My first post here was to find a replacement distributor - had two offers within a couple of days. I'm in Melbourne and the local wreckers still have R30's in the yard.

cheers,

JohnH

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4967935
Share on other sites

Congrats on the car. Interested to know what plans you have for it.

The forum is a good place to find parts. My first post here was to find a replacement distributor - had two offers within a couple of days. I'm in Melbourne and the local wreckers still have R30's in the yard.

cheers,

JohnH

Jh, intentions were some type of multithrottle set up, with improvements to chassis to cope i.e. firm up suspension, better front brakes. Except for the intake set, nothing too radical - just something nice, straight and perhaps a bit retro.

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4972337
Share on other sites

Melbourne is probably your best bet for parts.

But I am parting out the red hatch fairly quickly, the more sought after bits go in a few days.

I highly suggest gettting a parts car....

Mag86, the car I bought doesn't have power steering. So was thinking about getting parts needed for conversion (steering box, column, pump, mounts and anything else necessary). Does anyone know whether this is easily achievable or is there some quirk/weirdness - such as lack of mounting points - standing in my way?

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4972342
Share on other sites

I could do it for you. But it would be a bugger to get to ACT. Why no P/S??????. All my R30 have had it, even the poverty pack RMR. Is it really an R30?????

It is definitely an MR30. It was bought by an old guy in '84 who didn't option PS or A/C. It was obviously a bad summer in 87/88 as he went back to Nissan dealer and coughed up about $900 to get factory air installed. I have all the reciepts and the 'Genuine Nissan Air' sticker he never put on the car.

Anyway I was also under the assumption all MRs had these features too. Really looking to get the parts (at some point in the near future) and have a go at it myself. Have you replaced these parts yourself? Is it an easy job?

Link to comment
https://www.sau.com.au/forums/topic/297077-r30-wanted/#findComment-4972389
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
×
×
  • Create New...