Jump to content
SAU Community

Recommended Posts

Munro - put down the crack pipe and slowly back away :cool:

As per the OP and the topic

"Sorry guys, went with a GT2"

I would be sorry too, the Carrera S is a much better daily, much more refined and arguably quicker point to point on real roads than the GT2. To buy Porsches attempt at a track car, and then keep it on the latte strips, thats really something to be sorry about :D

However its his car, his money, and an R35 forum :blink:

Edited by Martin Donnon
  • Replies 304
  • Created
  • Last Reply

Top Posters In This Topic

But would you have to post it on a Skyline forum to validate it? :blink:

Remember our R35 was the car that blew the 997 GT2 away in the track comparo in Wheels 2008 when it was dead stock by well over a second a lap. I like Porkers we had a modified 996TT it was a nice thing, but not R35 fast :cool:

From what I can tell he was choosing between a 35 and a porker. He's decided to go for the porshe. He is modding it and keeping us abreast (i fkn love that word and use it as much as possible) of the results. As a car enthusiast I enjoy reading about it.

Who gives a fark that its not a nissan and that is a porker?

Who gives a fark that its not a nissan and that is a porker?

It obviously upsets Martin that someone might choose a Porsche over a Nissan, and then have the nerve to not take it racing.

Edited by DCIEVE
Munro - put down the crack pipe and slowly back away :)

As per the OP and the topic

"Sorry guys, went with a GT2"

I would be sorry too, the Carrera S is a much better daily, much more refined and arguably quicker point to point on real roads than the GT2. To buy Porsches attempt at a track car, and then keep it on the latte strips, thats really something to be sorry about :bunny:

However its his car, his money, and an R35 forum :D

The Carrera S is in fact a very nice drive, I hired this 997 S (PDK) in Germany a few months ago…took it for a quick spin to Switzerland for a long weekend. It does not offer the same driving experience as a GT2. Also toured the new Porsche museum & factory.

DSC00128.jpg

DSC00122.jpg

DSC00147.jpg

DSC00122.jpg

Is that the "best driving road" that the top gear guys found in switzerland some episodes back? Looks like they could have made it a lot straighter than they did but someone in the roads dept wanted a reeeally nice road to have a fang on! Makes our Mt Alma hillclimb look a bit lame!

Akrapovic system arrived last night. Quality looks very good. Waiting on gaskets to arrive, will then install.

DSC00796.jpg

DSC00801.jpg

DSC00811.jpg

DSC00814.jpg

Wow, look at the build quality on that exhaust system!!!

Any chance of a youtube vid once installed?

Would love to hear the bark of this beast....

I too like to think of the R35 as being the faster car, whether that is true 100% of the time or not.

However, I am a car lover first and foremost and, like many others reading this topic, am very appreciative of MGS showing us his choice over an R35 and the ensuing modifications. I may be looking at a Skylines forum, but I don't mind a peek at a Porsche.

MGS does not need to justify to, or receive validation from, anyone regarding his choice of car or how he chooses to use it.

MGS, thank you.

Surely there's many other more appropriate subforums here for this particular topic.

Given the bitter rivarly between Porsche and GTR fans and especially the choosing of the name for the topic ("SORRY guys.....") I find this beeing in the R35 section uber smartass.

As far as the car itself, it's a shame when a car built for track never goes to the track.

It's almost like beeing married to Jeniffer Hawkins but never having sex with her.

Edited by mitric88

I suppose when its your money and your car you can do what you want with it. I'd hardly call it a "bitter rivalry" locally, thats all US forum stuff where they haven't had the exposure to GTRs like we have here.

I find it hard to see the reasoning why he needs to justify to others how he chooses to enjoy his vehicle, this is an enthusiasts forum no? If you don't like this thread, don't click on it. Its one of thousands on SAU.

Sorry will not see the track, only the occasional weekend drive.

I'm sorry to hear that - would love to see it's new brother doing something like this at 150km/h around the Southern Loop.

If I were you I would pack it up in the shipping container, send it to Europe and spend a whole month driving around - that continent is made for driving, not Oz - too restrictive, with 80-100kmh speed limits. I seriously doubt you could have fun on the roads near Melbourne, unless doing speed limit plus a bit is fun for some.

post-62747-1265534036_thumb.jpg

Rivarly was very alive and very bitter at Mallala today.

Many Porsche owners drove and praised the R32 GTR at Nissan track days in '91 but I doubt that the majority of them even remotely considered being seen in one and not much has changed with the R35 GTR

Everyone thought they were good bits of kit at Bathurst late last year and checked them out, no bitter rivalry that I saw. Most everyone was keen to see them out and about on the track.

Although everyone loved the R34 going nuts in the super sprint and taking the honours.

As far as the car itself, it's a shame when a car built for track never goes to the track.

It's almost like beeing married to Jeniffer Hawkins but never having sex with her.

not quite... its more like being married to "said person" and never doing "said action" in the bedroom, as that, viewed by others is the appropriate location to carry out such activites.... there is much much enjoyment to be had with "said person" in the kitchen, bathroom, hallway, dining room, lounge room, garage, pool, beach, back alley, etc. etc.

sex in a relationship is just one part of a big thing, and when it comes to a cool car like this... the driving is just one part of ownership... not like a stripped out cop which is only really good for an hour of thrashing...

the GT3 RS is built for the track.. the enzo FXX is built for the track.. the gt2 is just a really really fast road car..

I'm sorry to hear that - would love to see it's new brother doing something like this at 150km/h around the Southern Loop.

If I were you I would pack it up in the shipping container, send it to Europe and spend a whole month driving around - that continent is made for driving, not Oz - too restrictive, with 80-100kmh speed limits. I seriously doubt you could have fun on the roads near Melbourne, unless doing speed limit plus a bit is fun for some.

Nah you can have fun on Melbourne roads. Well you don't need to break the speed limit to have fun...just don't "brake" the speed limit and you'll have fun :P

Dandenong Ranges ftw. If you want the feeling off 300km/h in a straight line rent an R1 for a day and accomplish it in the space of 30 seconds lol. Not that I condone it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
×
×
  • Create New...