R34 Gtt,r34 Gtr Loom?(pulling My Hair Out!)

[Clockworks]

Hi guys,after converting my r34gtt to rb26(r33 eng/box/loom)the wiring is absolutly driving me mad(no tacho/speedo,watertemp,abs,hicas..),would a simple solution be

to fit a complete loom from an r34 gtr to my gtt and just reverse the cas?

[aphid]

Any gtr loom would be alot easier than using the gtt loom as most of the plugs are different, depending on what kind of ecu you're running it would also probably be a good idea to get the injector ballast resistors too..

Also if you're thinking about running a 34 gtr stock ecu or power fc, don't. They both support the Nissan Anti Theft System that comes stock with the 34 GTR and will never run, unless you can get the NATS IMMU, Ignition Barrel Amp and the matching 34 GTR key then be bothered wiring the whole system up

Edited November 21, 2009 by aphid

[Clockworks]

thanks for that. . .

[R31Nismoid]

Why you even bothered trying to use the GT-t loom amazes me

GTR looms are cheap, then its just a few wires to get it all working.