After A R33 5 Speed Exploded Diagram

[Mase]

I've been stuffing round with my R33 gearbox with custom bellhousing for my SR20DET. I have a random washer though that I can't work out where it came from. Does anybody have an exploded diagram similar to the one in this post? Even the user manual with a gearbox break down would be handy.

Thanks

[The Dan]

take a photo of the washer and I'll tell you where it goes.

[battery]

this may help

http://www.rbforums.org/tranny1.html

[Mase]

Thanks for the help. Picture is attached. Found it in the rear housing, but there's a possibility it may have fallen through from the front when dissasembling. I think it may be a thrust washer.

Edited November 23, 2009 by Mase

[The Dan]

Yeah it is. You will need to pull off the reverse gear side. There is another one that looks the same but it has a tab sticking out the side which points towards the sandwich plate to locate it in that reverse shaft. It goes on the third shaft that slots into the housing. Make sure you put the bronze side towards the gear (away from the bearing)

Any questions, send a pic of the back side of the gearset and I'll circle where it goes

[Mase]

Awesome. Thanks for your help. I've been trying to get my head around these things as it seems gearbox problems are an ongoing thing with the car.

Thanks

[Mase]

Ok so it goes on the bottom left shaft in the photo with the bronze side facing towards the front of the box. Just wanted to confirm?

[The Dan]

Yep, that's the one

[The Dan]

Put a decent glob of grease under it (on the bronze side) and it will stick nicely so it won't drop off

[Mase]

ok thanks a lot for your help.

[Mase]

Got another one for you. I couldn't find this same washer in the other R33 box I have so i'm unsure of the location for this one.

[The Dan]

Got another one for you. I couldn't find this same washer in the other R33 box I have so i'm unsure of the location for this one.

Yeah that goes in the bellhousing under the cluster shaft end bearing

[Mase]

Thanks for that. The other gearbox had the washer still in place so I didn't really notice it. Thanks again.