Jump to content
SAU Community

R33 Series 1, 93 Model Gt Turbo For Sale.

1gtsky

By 1gtsky,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

1gtsky Apprentice

1gtsky

Posted
Posted

selling 93 model gt nissan skyline r33 series 1 , 121000 killometres has few problems which include a slight mis which seems 2 occur when hitting large holes in road also airconditioning does not work properly and when turned on car runs rough and seems 2 stall, exhaust has a slight rattle, windscreen has a scratch, other than these problems and a few minor scratches car is fairly clean stil drives and is driven evry day has 6 months rego , 18 inch chrome wheels, cd player , turbo timer , boost guage, car is manual and grey in colour, would ideally suit someone looking 2 rebuild the motor or do a engine swap price is 5,500 ono car is located on the central coast nsw thanks..

1gtsky Apprentice

1gtsky

Posted
  • Author
Posted

thanks scott got your pm because ive had less than 10 posts i cant pm you back , but im really looking at selling it together with the rims and everything complete , as its stil very much drivable and i drive it 2 and from work evryday also am geting a 4wd and will hav no use 4 the rims , i really cant go much lower than $ 5000 but as i said im open 2 offers. thanks. will post pics over the weekend.

  • 2 weeks later...
reaper1721 Collaborator

reaper1721

Posted
Posted
mate not 2 sure on brand of rims, im pretty sure they are a tempe tyres rim 18 inch deep dish , and yes afraid they are 5 stud pattern not 4 :P

The rims look alot like Starcorp Tracers

heres a reference:

http://www.injektd.com.au/packages/17/1771.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well some mostly good news and some slight bad news.  Good news is cylinder 6 did in fact only require a honing and I'm good to run my 86.5mm pistons again. I should also get the block back by end of week. Bad news, had a few surprises pop up. First, main and rod bearings were trashed. No sign of any heat damage. I knew right away what caused this... I had not packed my oil pump originally and spent a lot more time than I would have liked cranking the motor to get oil pressure. It sounded fine once started so I chucked it up to luck and forgot about it. Luckily rod and crank are fine and just need new bearings. Engine builder agreed that this was the cause.    Another surprise that carbon covered up very well that I didn't catch, something got sucked up and went through cylinder 1, 2 and 3. Luckily this was no cause for concern, just needed a bit of cleaning up. Valves look fine but he will vacuum test the head this week to confirm. I'm presuming this was something left over from welding my intercooler piping, but we'll never know. I'm going to thoroughly reclean everything.    So all in all, happy the motor is fine, and I'll get it back much sooner than expected. I'll also be taking the time to convert my WMI system over to direct port. I'll snap some pictures of that when the parts come in. 
    • sunsetR33
      R33 GTR lift points for hoist

      By sunsetR33 · Posted

      I understand, thanks. Yeah I wouldn't want the car to tip over, I'll try and use the sills, I don't want to risk smashing the chassis rails. I ordered some rubber pucks that have a hopefully big enough slotting. If the front right gives me trouble I can always just make a wood block. I'll measure and inspect the sills closer once I actually take the car up. I hope so, but the rubber blocks I had in hand so far were pretty damn firm, if they are that hard they won't give much way. I'll let you know what happens. Angle grinding rubber isn't one of my favorite tasks. I'll probably start a build thread soon, for my own documentation and "log" as well as sharing what's going on with the car.
    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      Kinda something I have been thinking about.  To be honest, we bought it already driving like that.  So there's no telling how long it actually has been driving like this.  Hopefully damage is too bad when we drop the pan.   I am having a hard time finding a site that sells the solenoid for the 5 speed auto, do you have any suggestions?
    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      That'll be most likely down the road...  LOL  
    • JC71
      r34 gtt tall spoiler

      By JC71 · Posted

      a stock / option or aftermarket?
×
×
  • Create New...