Jump to content
SAU Community

Recommended Posts

Ok so i bought the car with a stock cassette player and speakers... damn it was bad quality :)

So i bought myself one of these http://www.alpine.com.au/products/product.asp?modelID=408 for $340 brand new (thought i was a bargin considering the RRP on the alpine site is $699)

The unit may be abit overkill for me but i wanted the 2.2" screen.

So my stock speakers do sound alot better then before, but the problem im facing now is i cant get some decent sound over the noise of my exhaust (starts to distort) :P if that makes sense.

Looking now at getting some decent quality front and rears and i think its a must to get some sound deadening also. Just wondering what is the best setup of speakers and other things

for the headunit i have / car. (not too knowledgeable in audio stuff)

Thanks in advance :)

Ok the 50x4 amp in that unit is not going to cut the mustard if you want to get over the top of your vehicles noise floor ( the sum of all the noises created by the car eg, wind, road, tyre, exhaust, engine etc). Firstly what is your budget? secondly don't bother with rears unless you plan on using them for low frequencies (below 250Hz).

If you want to get away with minimal cost but end up with a reasonably good quality system I'd suggest

1) A good 2 way component set of speakers

2) A 4 Channel class D amp (4 x 150watt) 2 x 150watts for fronts & 1 x 300watt for sub.

3) A subwoofer

Contrary to your request I've suggested a sub because you won't get the lower frequencies & thump without spending a considerable amount of money on the front speakers and installation.

So your budget will come into play as to what you will be able to get, if you want good quality and don't mind getting S/H gear shop at the for sale section at MEA but don't forget to make an allowance for installation:

http://www.mobileelectronics.com.au/forums...hp?showforum=41

Edited by mosoto

Nice deal on the IDA-X305, always liked that unit... good price on that for you there too!

anyway, Alpine do a package deal that comes with:

1x MRP-F600 4x100WRMS 4 Channel Amplifier (yes, its a true 100WRMS)

1x SPR-17S 17CM Type R Component Speakers (tweeter positioning is something to think about, they're big suckers)

1x SPR-69C 6x9" Type R Coaxial speakers (Ask your dealer to swap them for SPR-17C for you, i know i do for customers, as the 6X9"s wont fit)

comes to about $1300 RRP, and the pack goes for $999. works out that you get your rears for free.

Good sounding speaker in the $349 range, you can get a speaker with a nicer high end, but the type r really does well, and makes a LOT of midbass.

Mosoto:

Since when are 4 channel amplifiers class D?

I can tell you straight up. a good mp3 headunit, and some rockford fosgates punch with an amp.. I went that road and wholly f**k never had so much bass from 6" speakers.

Dont beleive me pop into a local chinabarn and check them out!

  spec-V said:
oh an all for under $500. Best bang for your buck and sounds great.. spending any more that $5-600 on your stereo is silly.

Sound systems belong in your loungeroom. Cars belong on the street with some power :D

speakers, head unit and an amp for under $500? what modle speakers and amp ect

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know it's an entirely different engine, but I noticed practically 0 difference removing or adding 2x 3in (5inch body) 400cell cats (one in each bank) with regards to sound. So changing the cat to change drone I suspect will have very very, very, very, very, very very minimal impact.
    • 200 cell cat will probably help. Do you have room to tee off a Helmholtz resonator anywhere along the exhaust? These can do wonders for drones, with a little experimentation with regards to length.
    • The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
×
×
  • Create New...