Jump to content
SAU Community

Recommended Posts

What guages do you guys find useful?

I currently have a boost gauge and an oil pressure gauge, both of which are obviously also standard on the dash to some degree.

What other type of gauges and what reason do you have them?

Link to comment
https://www.sau.com.au/forums/topic/29761-what-guages-do-you-find-useful/
Share on other sites

In short, none, boost and oil is about all you want, extra tacho's are wank, if you want a shift light, just get a shift light, water temp can sort of come in handy if your keenish to do motorsport, because factory water temp guages don't really show temp varients of a couple of degree's..

other than that, stick with what you have, its all you really need.

I've got a sweet little temp sensor rigged up inside my cai partition. tells me the intake temps on hot days and gives me a rough feel for how the car should be performing etc.

it's connected to a blue EL light thingo which also has a voltmeter on.

loud stereo = need for a voltmeter. I'd like an ammeter too, but the feckin batterys in the boot, innit.

I'be got a hks boost gauge (reads up to 2bar) currently running 1 bar through the turbo and a greddy oil pressure gauge. I've found the gauges move much quicker than the stock ones plus being mounted on my a-pillar they are easier to read than the stock ones without taking my eyes off the road too much.

I've got a sweet little temp sensor rigged up inside my cai partition. tells me the intake temps on hot days and gives me a rough feel for how the car should be performing etc.

Me gots one of those units too.... bought it ages ago when I done my CAI.

All up I've got displays for

Rich/Lean bar Graph

Intake Temperature

Volt Meter

Boost

Speed alert

Revs

Digital Tacho

Shift Light

Trip Computer

Airflow

Knocking

Throttle

and more......

....love the blue Screen stuff :)

How much are they and where can I get me one? :)

Me gots one of those units too.... bought it ages ago when I done my CAI.

All up I've got displays for

Rich/Lean bar Graph

Intake Temperature

Volt Meter

Boost

Speed alert

Revs

Digital Tacho

Shift Light

Trip Computer

Airflow

Knocking

Throttle

and more......

....love the blue Screen stuff :)

do you honestly get much info from all those gauges though... i thought it would be easier to drive a car when u knew only select things. So you don't look at your volt meter bouncing while you're stereo's blasting and not concentrating on the road...

Then again those DEFI Link gauges are sweet as.

i only would need decent boost gauge oil pressure oil temp and possibly water temp...that about it the main two i would want is boost and oil temp.

Yepp, same here.

Boost gauge cause the factory one is slow and not in bar or psi :)

Oil pressue cause the factory one is slow and the sender can be dodgy.

Oil temp cause it give's you an indication on how the motor is and also can monitor it when cooling the motor down.

Water temp would also be a go'er if your doing some track work.

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...