Jump to content
SAU Community

Recommended Posts

For Sale:

1989 R32 GTR - Silver

Location: VIC

Purchased in 2004 - Self import ex Japan. Drove the car for a few years and then parked it (last registered in 2006) I have had this car sitting in my garage for about 3 years contemplating engine rebuild... I decided at the beginning of this year I would go ahead. As it turns out, just when all is done my missus tells me JNR is on the way... sell the car!

RACEPACE have just completed a fully built RB26 and reco'ed my gearbox... I just spent a small fortune on the car (receipts provided)

402.6 RWKW on Dyno last Friday 20/11/09

Car has some cosmetic panel damage on passenger door skin and rear 1/4 panel.

I will list as many things as possible but I may miss a few aftermarket goodies;

Big Single - T78 Turbo

TRUST Intercooler

Apexi - Power FC + H/Controller (Fully tuned by Ben @ Racepace)

TIEN HA Coilovers

TRUST Oil Cooler

ProfecB Boost Controller

Sinnea 2 piece 18 x 10 Deep Dish Rims - 90% Rubber (less than 5000Km on tires)

HKS N1 Exhaust Cat Back

Custom Headers / Dump Pipe / CAT

Usual Gauges and so on...

Asking $29000

Heaps more pics (new) that I can send or direct you to

Contact me via SAU and provide phone number or I will send you mine via PM

Robin

DYNO_NOV2009.pdf

post-10440-1259197899_thumb.jpg

Edited by RTFGTR

hey mate can you please email me some more pics of your car including some inside shots. also can you include a brief list of the parts used in the rebuild? send to [email protected] cheers mate.

hey mate can you please email me some more pics of your car including some inside shots. also can you include a brief list of the parts used in the rebuild? send to [email protected] cheers mate.

Off line all weekend, will send all requested info tonight after work... busy today =(

** Same applies to all PM's received. I will action all and reply tonight.

Thanks

hey mate can you please email me some more pics of your car including some inside shots. also can you include a brief list of the parts used in the rebuild? send to [email protected] cheers mate.

Email sent

For Sale:

1989 R32 GTR - Silver

Location: VIC

Racepace RB26 Stage 1.

o Block/Head inspected, water and oil gallery plugs removed, hot-tanked, crack and pressure tested.

o Block bored and honed (strainer plate), decked to correct compression height, crank tunnel line honed. Strengthen block weak points (similar to N1 block)

o Oil galleries modified, tap galleries, fit threaded plugs, modify water galleries, new welsh plugs.

o Conrods resized, bushes replaced and individually honed to suit piston pins.

o New R34 Crankshaft, rotating assembly fully balanced.

o Race Pace Custom Forged Piston and ring set.

o Nissan N1 Oil Pump (Modified), Nissan N1 water pump.

o Race Pace special main and big end bearings.

o Cylinder Head: Replace valve guides / stem seals, cut seats, face valves, match chambers, surface, re-shim.

o New cambelt, tensioner and idler pulleys, metal head gasket, new seals and new thermostat.

o Fully blueprinted, block painted and precision assembly.

402.6 RWKW on Dyno last Friday 20/11/09

Car has some cosmetic panel damage on passenger door skin and rear 1/4 panel.

I will list as many things as possible but I may miss a few aftermarket goodies;

Big Single - T78 Turbo

TRUST Intercooler

Apexi - Power FC + H/Controller (Fully tuned by Ben @ Racepace)

TIEN HA Coilovers

TRUST Oil Cooler

ProfecB Boost Controller

Sinnea 2 piece 18 x 10 Deep Dish Rims - 90% Rubber (less than 5000Km on tires)

HKS N1 Exhaust Cat Back

Custom Headers / Dump Pipe / CAT

Usual Gauges and so on...

Asking $29000

Robin

Some rebuild info for the RB added

Hi, Can you pls send pics to [email protected], including engine bay, interior, damaged panels and anything really.

Thanks, and im a serious buyer, cash ready for the right car.

Also, what was done to g/b?

One of my fav GTRs which deserves a good home. The noise this thing makes and nice low stance with mesh wheels is a great look! Best of luck and shame it has to find a new home :D

Thanks Roy - Thanks GTR 94 for your kind words about my baby (The GTR that is)

Some good times had back in the day and a damn shame it has to go... especially after hanging onto it for 3 years in the garage dreaming of rebuild.

It will be back at Racepace for a few lil RWC things this week then registered hopefully in a few weeks time so I can enjoy a few more summer drives before it's SOLD

(Would love to do another track day now I have 400+kw to play with but just can't risk anything going wrong :) )

  • 2 weeks later...
  • 4 weeks later...
Price Drop $27000ono

0447686478

OK only 8 to 10 weeks to go B4 my baby girl comes into this world and nothing but rim kickers and pic junkies interested so far... I'm CRAZY but;

PRICE DROP to $23000 firm as is.

Just spent in NOV09 $18K on the RB26

0447686478

Robin

Can you post pics of damage.

Do you have an estimate to fix it?

Cheers

alex

Hi Alex,

Depends on how you fix it... bog and paint about $800 if you do it the way it should be done... $2200

pics of damage and car at http://s782.photobucket.com/albums/yy102/Robin_Feb/

Regards,

Robin

Hi Alex,

Depends on how you fix it... bog and paint about $800 if you do it the way it should be done... $2200

pics of damage and car at http://s782.photobucket.com/albums/yy102/Robin_Feb/

Regards,

Robin

CAR IS SOLD

:P

Let me say it sold cheaper than my firm price.... dude has grabbed the buy of the year

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...