Jump to content
SAU Community

Hit a pedestrian Friday night on Toorak Rd


Recommended Posts

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

i finally got hold of the cop tonight.. he tells me she was ok.. broken collar bone tho.. shes from mornington and remembers nothing of the accident but the scary thing now is.. on the night there was these 2 guys that said they saw the whole thing and i wasnt doing anything wrong.. now the cop says because i say i wasnt doing anything wrong.. she doesnt remember anything so it all comes down to what "THE" witness says.. i go wasnt there 2 witnesses there and hes like nar there was only 1.. so now iv lost the 2 guys that said i was in the right and theres some new witness

OK, some advice, call the cop shop that is dealing with it and ask to speak to the sgt. Explain the situation to them, they might be able to get to the bottom of it for you, tell them you need details for insurance perposes. Call TAC and find out if she has made a claim, because she would have needed all your details (and your cars details to do so). Then thirdly speak to your insurance company and see what they suggest. DON'T run straight to a laywer, that can look (if it gets that far and u already have representation) that you are guilty of something.

Mate your story is a shocker cant believe it man, I suppose this I what you call a genuine accident, it is a blessing you had ppl at the scene that can vouch for you because from I what ive been told its usually the driver that takes brunt of the blame . I can truly understand you not sleeping I have to admit I wouldn’t be able to do much at all after that. I hope that it works out for you and this lady , in all fairness pedestrians have the responsibility to look and take in consideration conditions of weather and driver stopping time.

best of luck with it

OK, some advice, call the cop shop that is dealing with it and ask to speak to the sgt. Explain the situation to them, they might be able to get to the bottom of it for you, tell them you need details for insurance perposes. Call TAC and find out if she has made a claim, because she would have needed all your details (and your cars details to do so). Then thirdly speak to your insurance company and see what they suggest. DON'T run straight to a laywer, that can look (if it gets that far and u already have representation) that you are guilty of something.

i wish it was that easy.. for starters because the cops havnt made a decision to who’s fault it was i cant ask for my car to be fixed.. 2nd she wouldnt have made a claim with the tac because shes saying she doesnt remember what happened and is hoping that the cops dick me for something and get her off.. 3rd i dont have insurance and even if I did they wouldnt do much for me anyway cos i would have only had 3rd party if i did have any as a 22yo driver in a import gets stupidly priced insurance

Okay, regarding insurance, heres what to do.

There is a repairer in Fairfield who will do this sort of shit for you, ie, have their lawyers get the money from the girl for the damage.

They will make the claim through themselves, quote the work and then basically sue the woman for the cash. All you have to do is take the car to them and talk to them about it. I can't give you there name here, but they are a prestige auto body repairer in fairfield. They do extremely good work and will handle everything.

Also, if she goes to sue you, make sure you counter sue.

All this said, again get legal advice first so you know your rights.

BASS OUT

DON'T run straight to a laywer, that can look (if it gets that far and u already have representation) that you are guilty of something.

HMMMM. Can't say I agreee although I do see the point. Fact is though with no insurance, not knowing what THE witness will say, indecisive coppers and a chick who remembers nothing - can legal advice really be such a bad idea?

Just coz u get some advice now doesn't mean ur guilty nor do u need to tell them that u've sought advice.

Bummer havin no car. You know how to get in touch if you need anything though.

Bummer havin no car. You know how to get in touch if you need anything though.

smoke signals? nar im still driving it around.. got a new windscreen and gaff’d the bar on and same with the mirror… its amazing what some gaff can do…

hey your car is the same colour :P wanna swap mirrors? While we’re at it can I borrow your sun roof too? :)

dean has 2nd hand head lights for $300 each and mirror's for $150 each rekon i could find cheaper? 300 for 2nd hand light sounds like a bit much ill still have to get them both cleaned up too

That's the going rate i'm afraid, you may find cheaper, if you get lucky. I reckon he may give you both for $400 if you were reffered by a forum member? give it a go :D

i got my mate to do the 1st phone call while i was at work and he's friends with him and also bought a tt supra off him..

anyways i bought them both.. headlight looks brand new and puts my other 1 to shame so i havnt put it in yet cos that headlight exchange place isnt open again till the 5th..

thanx for you help anyways now i just need another copy of your front bar and im close to back on the road again.. and for these cops to say it was her fault so i can see some money

There was only a crack in the bar wasn't there? that can be repaired fairly cheaply i would think ;) looking at the damage mabe the bumper support was not cut down and re fitted?

When you repair or replace be sure to fit the bumper support and the end plates to give it more strength, I spent an hour with a bloody hacksaw in the drive way to make sure the bumper had some metal behind it. Watch out for the bumper ripping tow truck drivers!! they quite often go "oh well it's broken any way" and do more damage!!

yeah i spoke to pulse tonight and they said they saw how much you cut off yours and they'll try and help me with mine when i get a new bar..

also that tow truck driver was shifty.. when it was going on and i was there watching he got the wooden planks out and made sure it would go up nice.. and i saw it go up didnt come close to touching anything.. he must of just rolled it straight off the back when no1 was around

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...