R34 Parts Clearance

[adzR34]

Hello everyone,

Due to my latest turbo upgrade ive decided to place these parts up for sale and finally clear some valuable garage space for the holidays.

All items are in Sydney, pickup is preferrable but can arrange freight if required.

The first item for sale is the standard R34 Turbo (OP6 rear housing, see pictures), which is in excellent condition with no shaft play and intact turbine fins. Removed at approx 70,xxxkm's. This would be an ideal upgrade for the RB20 series engines or those seeking the most potent highflow for the R33's. Price: $400 neg

Apexi AFC NEO (colour)

I can strongly reccommend this piggy back unit to anyone seeking to extract the most from their standard turbo under a responsible budget. Most noticable after the tune was a dramatic increase in fuel economy and power output of 205.5rwkw @ 11.5psi. Note, this was on my R34 auto which does sap a tad more power than the manuals. Price: $340 neg

Advan Performance Split Stainless 3inch dump/front pipe to cat. I bought this item from Advan Performance for $370 1.5 years ago and it truely is a work of art. It is very similar to the BOSS split dumps as it has the long seperate wastegate runner to reduce rear turbulence and compliment any highflow exhaust. Price: $200 neg

R34 Rb25 Neo Air Flow Meter Price: $40

Due to work commitments i might be limited to responding to your PM's in the evenings, so if you require any further information or best pricing, plase send me a PM and i will do my best to handle your enquiry.

Thanks for viewing,

Adrian

[adzR34]

Prices are negotiable people

I also have a few bits and pieces like the elbow for the turbo and various lines that came off with it.

Cheers

[aluckyguy]

Gday mate. Nice set of stuff you have there. I have a fairly stock R34 Gt-T Auto (bar cat-back Blitz exhaust) and am wondering how the Apexi AFC works, as in are there any other things that may need to be done to install it? Do you remember how much it cost you to have it installed or did you do it yourself? Just lastly how low are you willing to go on the dump/front pipe? Unfortunately the other thing in factor is i live in Brisbane. Any information would be appreciated, as im new to a lot of this and am hoping to gain a little more power in acceleration.

[boz_soljah]

Apexi AFC in good condition, no problems ?

[adzR34]

Gday mate. Nice set of stuff you have there. I have a fairly stock R34 Gt-T Auto (bar cat-back Blitz exhaust) and am wondering how the Apexi AFC works, as in are there any other things that may need to be done to install it? Do you remember how much it cost you to have it installed or did you do it yourself? Just lastly how low are you willing to go on the dump/front pipe? Unfortunately the other thing in factor is i live in Brisbane. Any information would be appreciated, as im new to a lot of this and am hoping to gain a little more power in acceleration.

Thanks for your interest,

The Apexi is fairly simple in the way it works and part of the reason why i went with it was my car was an auto. Its a pretty simple device as it alters the voltage from the air flow meter allowing the tuner to correct the air fuel ratios's when you increase the boost pressure. I had it done professionally to make sure it was right and dyno tuned to suit my car.

The box includes everything needed for the install; the unit and instructions. From memory i think it cost me ~$300 for install and dyno tune which is pretty cheap considering the gain i got throughout the rev band and the slight increase in fuel economy.

Mate, honestly the dump pipe is a work of art if you see it in person and there is absolutely no fault with it, its stainless and it would last a very very long time. I cant really do much with its price as it hurts selling it for this low.

Also, i am able to post at buyers expense.

If you have any more questions, even in general things ill try my best to answer them. I remeber being in your shoes 4 years ago

Adrian

[adzR34]

Apexi AFC in good condition, no problems ?

Hey mate,

Was in excellent working order when it came off my car. It only came off as i upgraded my turbo. It pretty much gets you to the maximum u can see out of the standard turbo, a real terror on the streets

adrian

[STAGEA_KING]

will the pipe fit on a 1997 stagea rb25det(not NEO)?

Edited December 13, 2009 by STAGEA_KING

[adzR34]

will the pipe fit on a 1997 stagea rb25det(not NEO)?

Cant say for certain mate. However i am pretty sure if its based on the r33 engine it might not fit.

cheers

[V'z 34GTT]

hey Adrian,

if you can post the airflow meter at my expense consider it sold. providing there aren't any problems with it.

thanks

Veranga

Here is my mobile, just contact me through that. 0431 001 101. thanks

[boz_soljah]

would it go on a rb20det the AFC

[adzR34]

would it go on a rb20det the AFC

Yes mate it sure can, it feeds to the Air Flow Meter signal wires. Ive seen these also setup on honda vtec's, toyota supras and the like.

[RoVer™]

Hey mate, has the turbo been boosted? Thanks.

[V'z 34GTT]

hey Adrian,

Air flow meter still up 4 sale???

thanks

Veranga

[adzR34]

Hey mate, has the turbo been boosted? Thanks.

Hi mate,

Yeah it has slightly, between 11 and 12 psi is what hi boost was tuned to. I had a dual control boost controller so most of my daily driving was on the standard setting. From what i gather on these forums about 15 psi is the limit you would want to push out of this stanard turbo for a cetain amount of time.

With that said, ive inspected the shaft/blades and can state that they are solid.

If there are any further questions im happy to answer them.

Adrian

[adzR34]

ADVAN Dump pipe - SOLD!

[34skyline]

HI, can you send to melb if possible im interested in the apexi.

[adzR34]

HI, can you send to melb if possible im interested in the apexi.

Hi,

Im sure postage can be arranged.

Cheers

[34skyline]

Hi,

Im sure postage can be arranged.

Cheers

Hi, sorry I cant pm. Cant i get your email address to arange payment for this.

[adzR34]

Hi, sorry I cant pm. Cant i get your email address to arange payment for this.

Sure mate,

Try flicking me an email here: [email protected]

Adrian

[RoVer™]

PM sent.