R32 Gtr Error Code 11 And 13

[OWN U]

Hi people. I've just bought a 32 gtr, it's been in storage for the last 5 years. I picked the car up and the abs and 4wd lights are on.

I've now checked for fault codes and i'm getting codes

11 Fore aft G sensor 1 or circuit

13 Fore aft G sensor 1, 2 or circuit

Has anyone else come accross this problem? I've done a search but found nothing in regards to solving this problem.

G force sensor behind shifter is fine.

Thanks in advance.

Edited December 2, 2009 by OWN U

[OWN U]

Ok just checked resistance or volt reading and i'm getting nothing on both pin 26 - 29 and 24-25. So i'm thinking either sensor failure or damage in harness. What are your thoughts?

Edited December 2, 2009 by OWN U

[Moodles2]

ATTESSA fault codes or engine fault codes?

Code 11 is Crank angle sensor

Code 13 is Engine coolant temperature sensor

Check that the incabin 4WD fuse is intact, might have been pulled for RWD (will explain why ABS and 4WD lights being on)

[payback21]

+1^

[OWN U]

It's the ATTESSA fault codes. I've checked the 4wd fuse and there fine

[OWN U]

Also check the wiring to the sensor and the resiistance is within specs. Then i check for voltage reading to the g sensor in the dash and there is nothing so I am guessing there is a problem in the wiring from front sensors to g force unit located behind the shifter

[OWN U]

any ideas?