Jump to content
SAU Community

Recommended Posts

best bet, talk to Jetwreck as he has sorted through these problems for someone at least once before.

mmm.. Nagoya...

Have you changed your aircon filter (in the passenger footwell behind glove box) I pulled one out for someone and it was marked that it was changed 2 years prior at 70k. Only thing was the car was purchased in Oz with 42k 2 years prior.... the plot thickened.

So that sticker has the km it was changed at or the km to change it next?

Penrite also make a compatible oil for matic J which is full synthetic.

I payed closer attention today when I put the car into Drive... The clunking seems to come from the rear.. Obviously the diff has backlash.. BUT the car lurches Forward when it does into Drive.

Sound strange?

I'll so a service on the box, I'll use penrite 100% synthetic, it is matic J compatible.. Dno what you guys think of penrite, but I even use it to oil my BBQ.. (Jokes right)

Is the filter a gauze type? So it is serviceable, no need for replacing?

Checked out the AC filter... no date or anything on it.

slightly off topic

found this behind the glove box

IMG_4441_zpsb2383a9a.jpg

no idea wat it does, got some switch on the right side of the centre console...its doing something, but at the same time nothing ( obviously with the TV)

anyway, back to topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
    • This makes sense. I have 2 so I'll just choose the least favourable child to perform the task.  If all turns to shit, I've still got a spare.  Win-win!
×
×
  • Create New...