Jump to content
SAU Community

Recommended Posts

hey guys and girls.

recently bought a series 2 RB25 complete low km motor and removed the turbo as i have a 35r that took its place. lol

so the turbo is up for sale.

It comes complete with exhaust manifold all the lines and associated banjo bolts aswell as a custom bell mouth dump pipe that i found in the shed. turbo is by far the best condition one i've had over the years and has absolutely minimal shaft play. chasing $350 firm

Also have an RB20 turbo that was removed from the engine at 55 000kms (yes thats right) and same deal a 3076r took its place. lol.

has minimal shaft play if any at all. mint condition. chasing $100 firm

Factory Coilpacks from above RB25 engine with coilpack loom. $50

r33 series 1.5 dash in fairly good nick. $50

if you must have pics then just ask but we all know what this stuff looks like hey.

can be contacted on 0430 218 339. if i dont answer leave a message and i will get back to you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
    • Evening all. Got this odd issue with my R34 GTT. If I let the car idle for around 15 seconds or more (even when cold) and I jab the throttle a bit, a decently sized plume of blue/grey smoke comes out the exhaust. Doesn't smoke when idling alone, just when giving it some gas after idling. No smoke on cold start or from what I know, normal driving. Not 100% sure about smoke on decel but I don't think there's any. Any pointers on what I should start doing to troubleshoot it? Or if anyone has experienced the same I'd love to get some insight. Cheers.
×
×
  • Create New...