Jump to content
SAU Community

Recommended Posts

Selling this as i dont need them anymore. The tires Dunlop Direzza Sport z1 can have it with the package, still got abit of tread on it. Good enough for track this size, 17x9+15~5x114.3. Sample picture how the look like on the 32. Price $3300, anyone interested can just pm me :laugh:

888-1.jpg

CIMG3095.jpg

CIMG3092.jpg

Edited by Hoshima

Offer considered now, reasonable offer only. As you all know how much in the market for this wheels, so can throw me a offer >_<

  • 2 weeks later...

Sorry i couldn't send a PM, not enough posts.

Do you still have the rims? where are you located? might be keen - just trying to figure out if they'd fit my car (evo 9)

Sorry i couldn't send a PM, not enough posts.

Do you still have the rims? where are you located? might be keen - just trying to figure out if they'd fit my car (evo 9)

Located in Perth, pm send.

Sorry i couldn't send a PM, not enough posts.

Do you still have the rims? where are you located? might be keen - just trying to figure out if they'd fit my car (evo 9)

They will fit EVO9 but they will sit right on the guard if not out from but only just. You will need rolling for sure. Maybe some extra camber. Will look insane though.

  • 2 weeks later...

$2500 firm with tires now. No time waster and no stupid offer. Im pretty sure this is damn cheap already compare other shop selling $2800 and got scratches on them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well some mostly good news and some slight bad news.  Good news is cylinder 6 did in fact only require a honing and I'm good to run my 86.5mm pistons again. I should also get the block back by end of week. Bad news, had a few surprises pop up. First, main and rod bearings were trashed. No sign of any heat damage. I knew right away what caused this... I had not packed my oil pump originally and spent a lot more time than I would have liked cranking the motor to get oil pressure. It sounded fine once started so I chucked it up to luck and forgot about it. Luckily rod and crank are fine and just need new bearings. Engine builder agreed that this was the cause.    Another surprise that carbon covered up very well that I didn't catch, something got sucked up and went through cylinder 1, 2 and 3. Luckily this was no cause for concern, just needed a bit of cleaning up. Valves look fine but he will vacuum test the head this week to confirm. I'm presuming this was something left over from welding my intercooler piping, but we'll never know. I'm going to thoroughly reclean everything.    So all in all, happy the motor is fine, and I'll get it back much sooner than expected. I'll also be taking the time to convert my WMI system over to direct port. I'll snap some pictures of that when the parts come in. 
    • I understand, thanks. Yeah I wouldn't want the car to tip over, I'll try and use the sills, I don't want to risk smashing the chassis rails. I ordered some rubber pucks that have a hopefully big enough slotting. If the front right gives me trouble I can always just make a wood block. I'll measure and inspect the sills closer once I actually take the car up. I hope so, but the rubber blocks I had in hand so far were pretty damn firm, if they are that hard they won't give much way. I'll let you know what happens. Angle grinding rubber isn't one of my favorite tasks. I'll probably start a build thread soon, for my own documentation and "log" as well as sharing what's going on with the car.
    • Kinda something I have been thinking about.  To be honest, we bought it already driving like that.  So there's no telling how long it actually has been driving like this.  Hopefully damage is too bad when we drop the pan.   I am having a hard time finding a site that sells the solenoid for the 5 speed auto, do you have any suggestions?
    • That'll be most likely down the road...  LOL  
    • a stock / option or aftermarket?
×
×
  • Create New...