Jump to content
SAU Community

Recommended Posts

Burnt out, damn, why the hell do people bother burning them. In all seriousness the only reason I'd ever steal a car is to take it for a run to see how it performs, I'd prolly even return it from where I took it with a little apology.

It shows that the people who steal our cars have no f**king appreciation for a nice vehicle. Gaaawwddd I wanna catch these c*nts in the act with a club and a pair of bolt cutters handy, I can tell you now they can say goodbye to a few digits.

Firstly, sorry 2 hear about another car stolen. It sucks bigtime.

I noticed that the car was parked at Westfields Liverpool. No offense dude, but what did U expect? Leaving a nice car unattended in a carpark with a high theft rate. 8O

Most of us here would do a risk assesment and steer well clear of places full of Junkies and Car thieves.

BTW: I hope that U catch these scum and give them what they deserve :)

People still dont understand that UNFORTUNATELY we live in a society where there is a high level of incompetant dickheads who find it easier and more enjoyable to steal from people who obviously work to earn their own money. Its beyond me in some regards that people get upset about having their car broken into or stolen however when u ask where it was from a dodge place. yes theft etc happens EVERYWHERE but people that own a skyline/wrx/200sx/etc have to be prepared to go the extra mile to protect their cars.

just a thought.

  • 2 years later...

yes i understand this is an old thread but i want to comment anyway.

it makes you wonder how many people out there are professional car thiefs. this was no ammature job on a VK commodore. like it might only be a stock immobalizer sp? but still i know that i could not break into a car disarm it and make a getaway in the middle of the day in a westfield carpark.

these people are professionals and will take you car no matter how good your alarm is. its all just a matter of time. an unfortunate reality but a reality non the less.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...