Jump to content
SAU Community

R34 Plazmaman Plenums Hp Out Put?

dsrturbo

By dsrturbo,
in Engines & Forced Induction

 Share

Recommended Posts

Lukas 33 Proficient

Lukas 33

Posted
Posted
Cat like catconverta? It has no cat it has been removed. VT has been turn off and on with no significant difference

Right now its a odd ball. Because alot of money has been spent on te engine to only make 275kw :D

Yes catalytic Converter. Ah ok no cat....hmmmm. Have you tried seeing if it makes more power when you disconnect the exhaust from where the cat used to be? How bad is the pressure drop over the intercooler?

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Cam gears dialed in will be done next. However tuner has asked other tuners advice and they say if car makes 275 on 96 octane at 8psi. It should have no trouble making more power dialed or not. Im pretty sure the dynaPack Dyno is in rear wheel kw. I will have to ask about this?

96 octane... are you from America or similar?

Hub not equal to rwkw. You take the wheels off mate :D

275 on a HUB @ 8psi sounds about right however for a GT35. Anyway, that's not the main issue here!

If the timing is not correct mate, you can have issues making power, most certainly.

dsrturbo Apprentice

dsrturbo

Posted
  • Author
Posted
96 octane... are you from America or similar?

Hub not equal to rwkw. You take the wheels off mate :worship:

275 on a HUB @ 8psi sounds about right however for a GT35. Anyway, that's not the main issue here!

If the timing is not correct mate, you can have issues making power, most certainly.

Shell and Caltex in NZ is 96 Octane. We have Gull and thats 98 Octane. But is over 1 hours drive away.. We were running up on 96 and then doing a final tune on 98. But never got that far.

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

definately not the plenum...possibly the plenum install if there is a leak...

how is boost through the pull? does it stay constant or drop off a fair bit?

droping the exhaust for a run is the best idea as is doesn't really cost you anything and can rule out a component.

you'd also want to have the cams dialed in as they are a fairly important part of an engine and can see a range of differing results... which cams have you got?

dsrturbo Apprentice

dsrturbo

Posted
  • Author
Posted

I have 1 Tomei exhaust cam gear. Im hopeful that changing this will do something. Also the plenum, i removed yesterday and have purchased a new gasket to rule that out. The Exhaust tip is a oem nismo er34 unit and has a restrictor in it. A Small Armour All Spray bottle it to fat to poke up it. I think its 2.25" Diameter. But still pressure test was 2psi so.. Will suggest losining off the exhaust front pipe

Gasket is two weeks off from nissan nz / jp. Some bit of a wait ;/

dsrturbo Apprentice

dsrturbo

Posted
  • Author
Posted (edited)

Im hopeful we will get everything sorted by next time round. Here are a few pictures now taken of the exhaust "3" and what not.

Bit of a over dose with Silicone on the plenum..

I will take care of the silencer pictured by taking it to an engineer to saw off the tip. Remove the silencer. Take out a pcs of the silencer. Pop it back in. Weld the tip back on and after alot of $ will be good as new

p1030461l.th.jpg

p1030464v.th.jpg

p1030465g.th.jpg

p1030467.th.jpg

p1030469t.th.jpg

p1030470.th.jpg

p1030468ra.th.jpg

Edited by dsrturbo
Lukas 33 Proficient

Lukas 33

Posted
Posted
I have 1 Tomei exhaust cam gear. Im hopeful that changing this will do something. Also the plenum, i removed yesterday and have purchased a new gasket to rule that out. The Exhaust tip is a oem nismo er34 unit and has a restrictor in it. A Small Armour All Spray bottle it to fat to poke up it. I think its 2.25" Diameter. But still pressure test was 2psi so.. Will suggest losining off the exhaust front pipe

Gasket is two weeks off from nissan nz / jp. Some bit of a wait ;/

Ok um...but what cams do you have. As in what camshafts :rofl: 2.25" is bloody small! I think my exhaust is going to be too small for the 25/30 with a gt35r so 2.25 is pretty small. I know you say the pressure test said 2psi but I still think you should just drop the exhaust and measure the power output. Please :D

dsrturbo Apprentice

dsrturbo

Posted
  • Author
Posted
Fuel system? Pump? lines? pressure tested @ [given psi]?. What rail you using? are the injectors maxing out? is it IW or Ex?

Not he fuel pump and Injectors. Have a inside fuel guage ( greddy thing ) Tomei pump sard 800 or 850cc injectors. Maybe there Denzo.

Cams are Pon cams. Will see what happens second time round. 2 weeks away :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      That ring thing is interesting how it's holding everything together 
    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Butters
      UniClutch

      By Butters · Posted

      Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • NZ-GTT
      R34 GTT Battery Relocation To Trunk

      By NZ-GTT · Posted

      I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      Damn... Not the feedback I want to hear.
×
×
  • Create New...