Jump to content
SAU Community

R32 Full Exhaust And Rear Spoiler


Recommended Posts

Ok guys want this crap gonski! All in good condition. Pickup Items located in Liverpool area NSW Cheers

Rear spoiler $35 pic 1 pic 2 pic 3 pic 4

Rear spoiler in average condition. paint is fading on both corners. could do with a respray. one small chip on right side as can see in pics. wiring plug there, missing one or two bolts which shouldnt be a problem

2x Kuhmo Kh15 195/65/14 Cheap As $25 pic 1 pic 2 pic 3

Great for spares, about 50% tread left on them at a guess. One tyre has a nail in it, which can be removed i guess. I am not a professional so couldn't tell you 100%. Either way going cheap. Been in storage for a while just want them gone.

R32 Nissan skyline 3" exhaust turbo back twin tip $170 pic 1 pic 2 pic 3 pic 4

Turbo back exhaust removed off car want something different. 3" dump/front pipe through to cat and magnaflow twin tip muffler. Not to loud but has a nice deep growl, buyer will not be dissappointed. Direct bolt onto standard turbo. Cheapest upgrade you can do if you have stock exhaust. Selling cheap it's taking up space. Not the prettiest thing to look at but it does the job. Mid section pipe will need to be cut off on one of the ends and a new 3 bolt flange welded on. As i had it changed when i replaced my cat converter few years back.

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...

Few more items added guys, still have the tyres and exhaust. Price drop on exhaust $150

2 X green label AFMS been in garage for ages were both working when replaced, one is missing the mesh. cannot gurantee working condition $30 each

afm 1

afm 2

afm second

afm second 1

1 pair of indicators orange type - both in good condition but both have broken mounts see pics - $40

indicators

indicators 2

1 pair of clear indicators bought off ebay so they have gone yellowish see pics. all plastics and mounts are good $30

clear indicators

clear 2

1 r32/r33 starter motor bosch brand new bought 2 years ago only trial fitted hence few scratch marks never used. should work fine

since its brand new but i cant gurantee it because i never used it. $100

starter motor

starter motor 2

starter motor 3

1 x r32 whiteline front strut brace brand new $120

Strut brace

strut brace 2

rb20 turbo + box full parts see pics. pulled off car at about 120,000kms was running good no smoke from what i remember. Very little shaft play

only run 10psi going cheap $160 note actuator and all parts except turbo are off a rb25

turbo

turbo 2

turbo 3

turbo 4

1 x nismo Fuel pressure regulator - bought off here a year ago never fitted should work fine $100

All items located in NSW Liverpool area and can post all except for exhaust just ask for a quote. Thanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • 350/370Z CD005/9 seem to be a good choice, but you'll need to address the diff ratio issue.
    • Brand new r34 gtt box 
    • What is the go to gearbox these days for a RWD RB? Back in the day VG TT boxes were cheap and strong. Seems they are as expensive as an RB25 box these days. What are the options without remortgaging the house? 
    • Define "Nissan big brakes". You just mean standard R34 4 pots? And...it's not even the offset you need to worry about. It's really a detail of how much clearance there is between the caliper and the back of the spoke/face, which is affected more by the design of the spoke than it is by the offset. If you think about it....take any wheel, say a 19x8 that does fit and clears the caliper. Then add or subtract an inch of wheel on the outside, without changing anything else. You have changed the offset by half an inch, but not changed the clearance situation at all. Same for if you add or subtract an inch from the inside edge. The way for you to work this out is to take a wheel off the car, grab a straight edge and a ruler or two, and start to measure the distances from the wheel mounting face on the hub to the outer face of the caliper, and the outer diameter (that faces the barrel of the wheel) of the caliper. Armed with these dimensions and any other measurement that grabs your fancy while you are there, you can then go to the seller of the wheels and do the reverse measurements from the wheel's mounting face and see if there will be clearance to the caliper. There really should be. I have 17x8 RPF1s +35 clearing the caliper face by a finger tip. Those wheels do have pretty thin spokes with some curvature.... but then so do most wheels to suit Jap cars.
    • So I’ve got a r34 sedan that I managed to get green stickered, meaning I need to go through government approved wof station for my car to be allowed back on the road for some reason my car is certed for 19x8 rims.. I need these wheels  does anyone know what offset will be fine to clear Nissan big brakes? I saw 35et for sale near me, I can’t drive the car to test fit or risk being fined ..   I searched heaps online couldn’t find anywhere..
×
×
  • Create New...