How Do I ... Fit A Pull Type Clutch?

[RubyRS4]

I have a pull type clutch ready to go into my Stagea (manual conversion). Can anyone clear up for me how exactly the little lever inside the gearbox housing mates up with the carrier on the pull type pressure plate?

[The Dan]

You need to put the bearing and carrier on the fork first, then install the gearbox. Once the gearbox is together, use the fork to push the bearing into the clip on the pressure plate and it will lock in.

[RubyRS4]

You need to put the bearing and carrier on the fork first, then install the gearbox. Once the gearbox is together, use the fork to push the bearing into the clip on the pressure plate and it will lock in.

I'll give that a go tomorrow when I fit the box.

[T04GTR]

to remove you need a bent screwdriver thru the fork hole, hold the shiny retaining clip against the clutch cover spring, while its held there you should be able to pull the bearing out of it using the fork.

[snozzle]

a quick search would have found u this.....

http://www.skylinesaustralia.com/forums/R3...Gu-t268118.html

[RubyRS4]

A quick search didn't find that.

Got my own info in any case. Job done. Thanks for your input Elite.