3 Gauge Holder On Dash

[RicsR33]

I guys i have got a 3 gauge holder from ebay a little while back but im wondering what would be the best way to wire up the gauges? I dont particulary want to drill a hole through the dash but cant see anyother way without making it look messy? has anyone actually done this? and what did you do? Just thought I'd ask here first before i started choping my dash up !

Thanks

Richard

[.:: GimpS-R34 ::.]

other option is to encase wires in a split tube and run it around the dash.. but drilling a hole underneath will obviously be the neatest option

[ShyBoi]

Agrred + 1 craig

Option 1: Basically you could drill a hole under the gauge holder is best option but if you remove it you'll have a hole left behind

Option 2: Run the wires sealed down the back of the dash, so wires will be noticeable

Option 3: Costs more but you could get it moulded in like in the 34s so it looks factory

I will be doing this soon enough, will post my efforts for you later if you havent already done yours

[RicsR33]

Cheers think i will drill under the holder, just trying to feed the wiring through sounds like a heap of fun :S haha great, ill see how i go..

Cheers Guys

[.:: GimpS-R34 ::.]

remove your front dash and see if you can get a path underneath so your not going for a reach-around..

Option 4. Look at possibility of R34 dash conversion? lol that would be fun

[NA_Goodness]

I've been thinking about the 34 conversion for a while now... How hard would it be?? I've seen S15 dashes in S13s...

[RicsR33]

not to sure about a R34 dash conversion but I did do a MK2 -> MK3 Swift GTi dash conversion in my old GTi wasnt to hard but then again they run pretty much identical shells, wouldnt mind a nice 34 dash in the 33.