Jump to content
SAU Community

Recommended Posts

WAS $10,000

$4999 FIRM. BUMP .. TOO CHEAP

KEEPING IF STILL HERE NEXT WEEK

YOU WONT EVEN FIND A FRONT CUT THAT CHEAP..79kms

ONLY NEEDs GEARBOX $750 boss wreckers

Item: 1996 awd twin turbo legecy gbt twin turbo engine and all wheel drive conversion .subaru liberty. 79kms

Location: palmy gold coast

Website:

Item Condition: very clean.. needs box

Reason for Selling: no rush

Price and Payment Conditions: CHEAP...$6000 cash. $7000 swaps as is needs new gearbox. only 79,###kms . OR $9000 cash with deposit for new box and INSTALL..car was a old mods for $11,000. and gearbox played up. !! now gearbox has been removed ready for new box to bolt in and drive away.

Extra Info:

1996 awd twin turbo subaru liberty. 79kms

twin turbo conversion

legecy gbt twin turbo engine and all wheel drive conversion

only got about 75 thausand ks on the engine. everthing is good except no gearbox pulled it out no cash for new one..

top mount

turbo timer

simmons racing rims

3 inch exhaust

drift boost gauge

autogauge oil gauge

blits bov

apexi air filter

lowered springs

tint

clean interior

awd

tidy liberty

quick sleepa

SAME AS PIC WITH BLACK RIMS 0430828859

post-68974-1261043669_thumb.jpg

post-68974-1261043683_thumb.jpg

post-68974-1261043711.jpg

post-68974-1261043720_thumb.jpg

post-68974-1261043730_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Donut tried them out, they were fine as long as the bolt or nut wasn’t very tight 
    • It is a very complicated plastic tank. Sitting between the rear seats and the rear subframe. Requires a siphon venturi pump in the hat to suck the fuel from the passenger side to the driver side of the tank. The answer is probably prepping the tank very carefully to eliminate all fuel fumes, drilling any cracks to stop propagation, then plastic weld. I don't really see any other solution here. 
    • Does anyone know when your oil drops viscosity, if it is an issue? I imagine with tuned cars they will be overfueling more compared to a stock standard car and will thin out over time. 
    • anyone ever used these ? https://www.ebay.com.au/itm/186214260439?_skw=socket+set&itmmeta=01JEG3TKV388ZXGP8N7CHNCQ45&hash=item2b5b3c1ed7:g:mhAAAOSwwB9lf~Xm&itmprp=enc%3AAQAJAAAAwHoV3kP08IDx%2BKZ9MfhVJKkJwJeiNMm%2FsStacz%2BhjzBowaFnbNCowwe08vVGrW0FbesCs%2Flw%2FQYjDQLjKsuKvgysWT9%2F4b9AZUX3qLP5RDfFhtD8DxufvqBbyZrQAQXuG3h8%2BxxqhWhH8fIfU84eA9W7VIpxDNw9MWj9BdfkkMasYhcqOjTrcKwLyD3ftzZbaZb2Us7%2FFR1Q2kcT68ZYRU77%2F%2BtRr1qBS27BXxh%2FjWBQxhWyUcLlEFIb%2BITZPIKwxQ%3D%3D|tkp%3ABlBMUOy96oP0ZA   I believe the idea being, the rods push back around the shape of whatever nut you put in there. Sounds pretty handy to just need to carry 1x socket in the car for 'most sizes'  but, theory vs reality, anyone tried them?
    • I'm not that familiar with R33 tanks. Plastic? Up behind the rear seat between the towers? Or under the boot floor like a normal car? It's the battery that's up between the towers isn't it? So, plastic tanks. Well, um. The obvious reco is plastic welding, which you'd only look at asking someone who's really good at to contemplate trying. The fuel contamination and grot is probably going to make it quite difficult though. Whether plastic or steel - the end of the crack will want to be drilled before any welding or sealing is done. Otherwise it will just continue to wander along until something bad happens. Steel tank? The obvious answer is drain, wash, purge with inert gas and drill the crack end and weld/braze/silver solder/whatever the guys who do that to fuel tanks recommend. I had a crack/hole/leak in the bottom of a Commodore tank (oe was it my ALFA? - can't remember) that I slammed some gorilla snot onto and it never leaked again. It worked surprisingly well. Or, it's time to fab a new tank.
×
×
  • Create New...