Jump to content
SAU Community

Recommended Posts

ey fellas

got a bit of an issue here i had an RB25DET in my r32 gtst-4 and now im putting the RB into a 180sx i took the 4wd sump off and bought a standard RB25 sump from jap parts plus.. When i wen to put it on this arvo nothing lined up the sump seemed to short which leads me to believe they have given me the wrong one

just wondering if anyone has any other possible ideas to why the so called standard sump doesnt line up with motor??

cheers

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/
Share on other sites

what would be the best suggestion im going on atm buying a rwd 25 bottom end and smashing the head off mine on it... or just buying a cheap 25 unless thesre is someone or some shop that possibly sells custom sumps...

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/#findComment-4992774
Share on other sites

You can always remove the front diff and mod your awd sump @ embleton or some other ally welder

if you want to go as far as swapping blocks then RB30 would be cheaper, more torque and theres a few rb30 modded sumps on the market

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/#findComment-4993574
Share on other sites

If you're going that far might aswell get a 30 bottom end and smash your 25 head onto that..

Pretty sure that's your answer to everything....

Lyell can you replace that light globe in the lounge room? "Yeah, I'll smash an RB30 up there" :D

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/#findComment-4994089
Share on other sites

Pretty sure that's your answer to everything....

Lyell can you replace that light globe in the lounge room? "Yeah, I'll smash an RB30 up there" :)

LOL Nathan.. at least in this instance it's actually cheaper and better if he's considering swapping to a rwd block!

P.S. I was waiting for this :(

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/#findComment-4994691
Share on other sites

problem solved guys, was thinking of the 25/30 conversion but in the process of a hopeful/ succesful 26/30 build for my 32..

as i was removing the silicon from the bottom of the block i started digging up little 10mm thread holes in the block, once i cleaned the bottom of the block and changed the pick-up ad dropped the 25 sump on it all lined up, the guys who did the conversion on the car before i bought it muct of tapped out new holes for the 4wd sump and diff... all the stressing and all i had to do was clean it abit

thanks for the advice fellas have a good chrissy!

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/#findComment-4995144
Share on other sites

problem solved guys, was thinking of the 25/30 conversion but in the process of a hopeful/ succesful 26/30 build for my 32..

as i was removing the silicon from the bottom of the block i started digging up little 10mm thread holes in the block, once i cleaned the bottom of the block and changed the pick-up ad dropped the 25 sump on it all lined up, the guys who did the conversion on the car before i bought it muct of tapped out new holes for the 4wd sump and diff... all the stressing and all i had to do was clean it abit

thanks for the advice fellas have a good chrissy!

Second set holes are on all 4wd blocks . If your using tin sump how did you modify mount brackets for bottom row of bolts to hold box against block ??

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/#findComment-4995511
Share on other sites

Second set holes are on all 4wd blocks . If your using tin sump how did you modify mount brackets for bottom row of bolts to hold box against block ??

Are you talking about the wings that bolt to the bottom of the bellhousing?

Link to comment
https://www.sau.com.au/forums/topic/300559-sump-issues/#findComment-4995761
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...