Jump to content
SAU Community

Spotted!!


Shell

Recommended Posts

There was a green skyline (nfi what it was, andrew might know lol) that had been pulled over on the Monaro a couple of mornings ago. It was one of those pearl cars where it looked green & then pink.

that kinda sounds like the chameleon R33 that is getting about.. it seems to show up at the nats every now and then as well...

think it's gunners based..

Link to comment
Share on other sites

If ever visiting Trojan during the week pop by my work, FASTdigital, on vicars st.

Spotted blue r33 with black rims driving towards belco around 21:30 - (coulter drive and southern cross drive intersection).

Link to comment
Share on other sites

that kinda sounds like the chameleon R33 that is getting about.. it seems to show up at the nats every now and then as well...

think it's gunners based..

Pretty sure it works at dynotune or something in belco... always see it there... trying to hide :D

Link to comment
Share on other sites

Yesterday spotted tidy Gunmetal 32 GTR and Silver 33 4door on josephson st, always see a nice silver 33 around the caryards all the time, also spotted Gunmetal 32 GTST near Mckellar soccer club.

Link to comment
Share on other sites

Spotted a black r33, near spitting image of my car driving along William Hovel Drive this morn (South bound) around 9:10am.

Also spotted my r33 still sitting at home depressing me cos it aint going. Sux most cos ALL the major work want and need done to the thing is done. Just is small aesthetic things (except for the leak of water in the boot).. Runs and drives perfectly, looks great, sterio is all sorted, alarm system is all adjusted bout right now also... But got the fuel pump issue pissing me off now (partially it not working, partially my lack of time to work on it and try to sort out what the hell is wrong so I can fix it...)

Link to comment
Share on other sites

At least urs can move...

But yeh tis a sad issues also, both quite frustrating. I need more time to work on this and sort it out. And then hope all will be better soon....

Ahh, but today at lunch I removed the vac line to the actuator, and still couldn't make REAL boost....barely made it to 1 bar...if everything is working correctly, I should have shot through to overboost cut quicker than you can say wtf

I too am going to go insane with this shit lol

Link to comment
Share on other sites

haha...well my cat already (and has been since I got the car back after work was done for this power) makes a horrid metal vs metal vibration sound, but I'm fairly sure that it's the heat shielding on the top....I may or may not remove the exhaust from the front pipe and go for a VERY short drive this arvo to see if it's all good without that one there, but I don't know if I cbf risking it lol....

It's a ceramic cat of some kind...only strange thing about it is that it managed to flow 294.4rwkw the other week :\

Link to comment
Share on other sites

Bugger mate. Damn it sux having probs that can't just work out the issue and fix em right away (and don't cos an arm and a leg).

Best wishes, and once ur ride is up again, keen to check it out.

Link to comment
Share on other sites

Well failing my cat-less test this arvo, it will be going into autotech next monday for pressurised smoke through the intake test to find any leaks...and if I haven't tried dropping the cat yet, they'll also chuck her on the dyno for a run with only the dump pipe.

If it's the cat, I don't give a shit lol. Just means I gotta drive it a bit softer for a while til i replace it like I've been meaning to :D

And after speaking to Stao (Hypergear), he's assured me how unlikely it is for anything to go wrong with the turbo to cause this, short of damaging the wheels themselves - which is amazingly unlikely too. helps for peace of mind, love that guy's customer service.

Link to comment
Share on other sites

hahaha, yeah when I came up beside you I wasn't sure if you realised who I was from here....so I gave you a really ghey wave and then felt like an idiot rofl

yeah i wasn't quite sure of what kind of friendship you had in mind!!! :D

...not that there is anything wrong with that!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...