Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

K&H has recently been purchased by 3M products, and have been on par with their tinters, fillers, putties, primers and other various products for quite some time.

GMH Matt Black is the colour you used, yes?

Doesn't matter if it rubs off man, really doesn't. wash it, dry it, hit it with a rattle can and enjoy the f**k out of the hardcore street cred a rattle-can job gets you. lol.

i did it rattle can because i didnt want to have to worry too much over the paint job lol even tho im getting graphics, they arent gonna be anything like what the 34 has on her.

but yeah id say the K&H stuff is prob a lot better than the cheap as chips rattle can paint lol :P

  • 2 weeks later...

lots of things (dosent feel like it tho lol) have been done with the 31 latley........all door trims are now with aluminum, handbrake has been removed, coolant system has gotten a really good clean out, tacho has been installed....complete with shift light the size of a 20c piece lol......gauges have been dummy fitted and just need to be hooked up......tow bar is removed.

managed to finally get a few practice launches with her....not as easy as what i thought (a lot easier in the R34 which is manual, mainly cause i can hold the revs as high as i like but with the 31 she isnt budging over 2 grand atm) however in saying that im not getting any wheelspin which is definelty a good thing for sure......when she picks up after the launch she goes hard and frikin fast i couldnt believe how well she actually went..........im definelty going to be looking into maybe going to heathcote later on the year to see how she goes on the 1/4 mile.

anyway thats about it for now will be posting up pics soon :)

lol

nah the graphics for this creature are gonna be pretty simple, gotta have all the sponsors on there but will have a two tone effect with some gloss black "tribal/swirl" graphics happening.

what do you get from these "sponsors"? my car is covered in stickers from differnt places aswell, but i dont get jack from them.

Im very suprised people are sponsoring the car when its not even close to being finished, nor is there a drag strip in SA...so i cant really see local company's sponsoring a "drag Car' when there is no where in SA for you to race and give them their exposure.

Not trying to put you down or any thing like that, and I'm hoping that this blown adventure is not as optimistic as the last one.

what do you get from these "sponsors"? my car is covered in stickers from differnt places aswell, but i dont get jack from them.

Im very suprised people are sponsoring the car when its not even close to being finished, nor is there a drag strip in SA...so i cant really see local company's sponsoring a "drag Car' when there is no where in SA for you to race and give them their exposure.

Not trying to put you down or any thing like that, and I'm hoping that this blown adventure is not as optimistic as the last one.

well i approached different places for different things....like Discount Steel Supplies i asked for the steel for my roll cage......

and there is drag strips here in SA......they just arent 1/4 mile ones........but as the saying goes you have to run 1/8 mile to get to the 1/4 mile . lol

whyalla, coonawara, portland are the main ones, then mildura isnt far from me (about hour and a half) and then there is the big trek to Heathcote which will hopefully be happening later on in the year :D

have you ever been on the drag strip?

its more of a saftey thing than anything else. accidents do happen on the strip and it only take a split second for it too happen. what if i was to go up against a high hp car (and with the test and tunes you go up against anything) something happens and it slames into mine cause its crossed lanes? then what? i smash into the barrier or slam up against it, or flip the car even, anything can happen.

why take that risk?

and bozodos i go to all the meets at mildura so i know whats going on, and i am the mildura drag clubs photographer aswell.

and by putting the cage in now, it sets the car up for the future too, especially when im gonna have to eventually put in a 6 point cage....but starting off with a 4 point for now.

so dont lol at me please.

You could say the same thing about a good percentage of the cars that go there, cage free, i find it funny. That said, crashes are the most entertaining thing about drag racing :rofl:

TBQH drag racing here bores the shit out of me, its nearly always just big block monaros, big block fords, vn shitboxes, R33 posers etc. Crappy facilities (no shade or anything), a corrugated dirt road out there, and a lack of any decent cars due to it only being a 1/8th.

well i know there are plans to hopefully get the whole dirt track bit laid with bitumen

and there are some quality cars out there, but i guess cause ive been out there so much i know what the better ones out there are lol

and crashes arent good when you know the person driving tho, trust me :P

there are lot of things planned for the strip all which will make it better :D

It might be more viable if they do it up with bitumen road, and get these abovementioned improvements to the track itself. I haven't been for ages, but the last "street" meet I was at was just Monaros, Capris, Cortinas, Kingswoods, etc.

The Operation Drag Right used to be a big hit with the bogans though, used to have them on friday nights, ironically before 'hoon laws' came in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
    • Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • I feel like this is due an update
×
×
  • Create New...