Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

I've found one... :D

Based on the following table:

Bosch 910 pump is 200 litres per hour and supports 450 bhp at 73.5 PSI  

Bosch 975 pump is 228 litres per hour and supports 500 bhp at 73.5 PSI  

Bosch 984 pump is 228 litres per hour and supports 500 bhp at 73.5 PSI  

Bosch 044 pump is 330 litres per hour and supports 730 bhp at 73.5 PSI  

Bosch 040 pump is 235 litres per hour and supports 520 bhp at 73.5 PSI

There is a Nismo 4.1Litre per minute or 246 litre per hour intank pump that should support approx 540hp.

Greenline sell them for ~$500 AUD.

if your pump does the same noisy thing when hot then I guess they all do it

i was going to mention this!

was curious to know if anyone elses gets annoyingly louder when its hot (long drive + warmer weather)

im not sure how mine was mounted (its intank), but the only issue i have is that when the fuel gauge is on the second last notch, its classified as "empty" and will surge if it goes lower and i dont fuel up :cheers:

i was going to mention this!

was curious to know if anyone elses gets annoyingly louder when its hot (long drive + warmer weather)

im not sure how mine was mounted (its intank), but the only issue i have is that when the fuel gauge is on the second last notch, its classified as "empty" and will surge if it goes lower and i dont fuel up :cheers:

Yes yes yes - mine does this - I thought is was a problem with my pump - but if others do this too -then I guess not ! !

Phewwww - I feel a lot better now ! ! ! !

I have put 55L in mine, guage was well and truely on empty, and it didnt surge - that was with bosch 044.

If you have surge, there is a very good chance that the pickup isnt correctly located. next time you have low fuel, try pulling the pump, and checking that the sock is in the right spot, ie, it locates in the little section at the bottom of the tank designed for it to fit. Also, check the tounges on the back of the fuel pump bracked are secured (fitted) properly in the locator.

Err yeah, but why?

Edit: in tank it will be farkin' expensive. You'd really need to put them in a custom surge tank. But again I ask why? The 044 handles up to 700hp on its own. Combined with a smaller pump you might find it harder to control the fuel pressure. If you want to pair them up it's best to use the same pumps.

If one fails you'd never know, unless you had a really keen ear. You'd be better off just carrying a spare of the same type and the tools to fit it, if you were really worried about pump failure on the road.

The "surging" noise happens because Skylines have a variable resistor for the pump. When 100% fuel pressure is not required ie at idle or light cruising, it increases the resistance and the fuel pump slows down. 

With the PowerFC it seems to vary this a lot more between simply "on" or "off" like the factory ECU does. It also seems to want to vary a lot even when just idling, so the noise becomes a bit more annoying and "groaning" kinda because it dips up and down rather than just clicking between high and low pressure like with the factory ECU.

Joel, if your pump does the same noisy thing when hot then I guess they all do it. Design flaw maybe?

Ive noticed this with my 32...Anything below around 2800rpm, u get the shit groaning noise on/off. Though reving higher I never get it. Is there anything that can be easily changed? I get pretty much the same noises on empty or full.

So you have the pump mounted externally?

Originally my pump was mounted directly the chassis and petrol tank. I used to be able to feel the vibrations at my feet when driving through the floor pan.

I have since rubber mounted it and the noise can still be heard all though it is now heaps quieter & the vibrations have totally gone.

Before you get under the car take it to a car wash place and hit it with the high pressure hose up inbetween the diff and petrol tank other wise you will have lots of dirt and junk in your eyes by the end of the mod.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...