Jump to content
SAU Community

SLY 33 CRASH!! Front cut parts needed

25GTT

By 25GTT,
in Western Australia

 Share

Recommended Posts

25GTT Veteran

25GTT

Posted
Posted

Heya guys,

well as the title last night suggests while talking to a friend i didn't see t junction and went up curb my front bumper drivers side aint too healthy so hopefully can get that fixed, my wheel is in bad nick however it has been pushed back a bit. Do any of you guys know or can get for me parts for around the wheel might be steering arm not sure yet but any of those steering bits. any of you guys have any half cuts? I reaaaally need help on this one :-(

Will have more info tonight as to what is needed once it has been checked out and know exactly what part it is wheel is rubbing against the rear front mudguard.

any help is much appreciated.

Thanks guys....

Link to comment
https://www.sau.com.au/forums/topic/30073-sly-33-crash-front-cut-parts-needed/
Share on other sites
25GTT Veteran

25GTT

Posted
  • Author
Posted

OK it is at WA suspension and they have managed to source the majority of the parts. $900 drive away so i'mnot too unhappy with that. I looked at the damage behind the wheel and it don't look that nice but they said they will hopefully sort it all out. plus about $400 for repairs to bumper.... will my car ever be 100 % complete??

If any of you guys know of supplier with right hand castor rod aswell as a right hand side knuckle please let me know. The guy said we should be ok however these May be needed.

Guys thanks for your help on this one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dyl33
      Has anyone put in brand new full carpet? (not floor mats)

      By dyl33 路 Posted

      Got any pics of the carpet fitted?
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu 路 Posted

      When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah 路 Posted

      I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. I'm told as a chain breaks in it ends up regarding back about 0.5 a degree as the chain breaks in, making it bang on. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • Yeetus
      Has anyone put in brand new full carpet? (not floor mats)

      By Yeetus 路 Posted

      I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin 路 Posted

      Got the motor out and torn down. I'll be dropping off the block Monday. Luckily the scoring on Cyl6 is much less pronounced then the pictures made it out to seem. It can barely be felt. If you pass your finger over it 10x you'll barely notice it. Hopefully by some chance it will only require a honing. I'm not in the mood to buy one size larger pistons or another block. Oddly enough my 6th cylinder with the scoring has extremely clean intake valves compared to my other 5 cylinders. I'm worried the scoring was caused by too much fuel or Water/Methanol washing the cylinder. I'll review some old logs to confirm.  This was also the first time I pull an engine with the transmission still attached. It went much better then expected. I was worried my CD009 wouldn't make it easy due to its sheer size but it was much easier this way. 
脳
脳
  • Create New...